summaryrefslogtreecommitdiffhomepage
path: root/archival
AgeCommit message (Collapse)Author
2020-04-29unzip: -d should create the dirLauri Kasanen
The official Info-Zip unzip creates the dir if it doesn't exist. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-11-08unxz: show -t in --helpDenys Vlasenko
function old new delta packed_usage 33236 33247 +11 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-26gunzip: fix incorrect decoding of "fixed" inflate blocksDenys Vlasenko
function old new delta huft_build 1008 1022 +14 inflate_block 1253 1256 +3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 17/0) Total: 17 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25tar: fix fallout of: change -a from meaning "lzma" to mean "autodetect by ↵Denys Vlasenko
extension" Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-20gunzip: code shrink by using int-, not short-sized struct memberDenys Vlasenko
function old new delta inflate_block 1254 1253 -1 inflate_codes 629 621 -8 huft_build 1054 1008 -46 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-55) Total: -55 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-19gzip: code shrinkDenys Vlasenko
huft_build() still has way too many params function old new delta lit - 94 +94 dist - 94 +94 huft_build 1058 1054 -4 inflate_block 1281 1254 -27 cpdext 30 - -30 cplext 31 - -31 cpdist 60 - -60 cplens 62 - -62 ------------------------------------------------------------------------------ (add/remove: 2/4 grow/shrink: 0/2 up/down: 188/-214) Total: -26 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-19gzip: code shrinkDenys Vlasenko
huft_build() has way too many params function old new delta inflate_block 1293 1281 -12 huft_build 1085 1058 -27 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-39) Total: -39 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-11dpkg-deb: work around bogus error message when working with XZ compressed ↵Denys Vlasenko
packages function old new delta unpack_xz_stream 2309 2317 +8 bb_full_fd_action 464 472 +8 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-06gzip: code shrinkDenys Vlasenko
Converted a few 16-bit variables and small arrays to 32-bit. Stopped pulling desc->FOO members into temporary local variables in gen_bitlen(): on register-starved arches, this is a loss, temporaries go into stack slots. Sprinkled a few "const" on pointer arguments. function old new delta pack_gzip 742 745 +3 gen_codes 101 97 -4 build_tree 886 833 -53 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/2 up/down: 3/-57) Total: -54 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-05gzip: code shrinkDenys Vlasenko
function old new delta gzip_main 267 264 -3 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-05gzip: set default compression level to 6 when CONFIG_FEATURE_GZIP_LEVELS=nDaniel Edgecumbe
With this change, GNU gzip -n and BusyBox gzip now produce identical output assuming that CONFIG_GZIP_FAST=2. >> Excuse me, but I wonder one thing: Why should we follow >> strictly with gzip on the no-options default behavior? > First, the default 6 compression level is a de-facto standard. BSD gzip > and Apple gzip (on macOS) use this default as well. So there is a > reasonable expectation that different gzip implementations act the same. > For instance, if the default for busybox gzip becomes 9, then someone > writing a script using busybox gzip could reasonably expect that the > compression level will still be 9 when the same script is run on another > system. That would be wrong. Implementations should not deviate from > de-facto standards without a strong reason. > > Second, the inherent reason for this default has not gone away. While > processor speeds have exploded since the default was set, so has the > typical size of compressed files. Multiple gigabytes are nothing unusual > these days. And gzip is often used for compression on the fly, precisely > because it offers a good compromise between speed and compression ratio. > So I believe 6 continues to be a reasonable default. function old new delta deflate 939 927 -12 Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-05gzip: set compression flags correctly as per standardDaniel Edgecumbe
With this change and CONFIG_GZIP_FAST=2, CONFIG_FEATURE_GZIP_LEVELS=y, GNU gzip and BusyBox gzip now produce identical output at each compression level (excluding 1..3, as BusyBox does not implement these levels). Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-05gzip: default level with ENABLE_FEATURE_GZIP_LEVELS should be 6Daniel Edgecumbe
Fixes an off-by-one that actually resulted in level 7 being used Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-08-02tar: change -a from meaning "lzma" to mean "autodetect by extension"Denys Vlasenko
function old new delta tar_main 1026 1100 +74 packed_usage 33311 33329 +18 tar_longopts 309 325 +16 vfork_compressor 246 210 -36 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/1 up/down: 108/-36) Total: 72 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-08-01tar: code shrinkDenys Vlasenko
function old new delta writeLongname 226 228 +2 static.prefilled 48 - -48 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 1/0 up/down: 2/-48) Total: -46 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02libbb: reduce the overhead of single parameter bb_error_msg() callsJames Byrne
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26comment fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26libarchive: treat one "FIXME: avoid seek", take 2Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-24libarchive: treat one "FIXME: avoid seek"Denys Vlasenko
function old new delta xmalloc_read_with_initial_buf - 205 +205 setup_transformer_on_fd 154 150 -4 xmalloc_open_zipped_read_close 143 135 -8 xmalloc_read 201 10 -191 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/3 up/down: 205/-203) Total: 2 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-23bunzip2: the correct condition is "n < groupCount", not "n <= groupCount". ↵Denys Vlasenko
Closes 11896 function old new delta get_next_block 1677 1681 +4 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-28config: dpkg_deb should be dpkg-debDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-28config: more tweaksDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-28config: update size informationDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-27randomconfig fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-27hush: allow hush to run embedded scriptsRon Yorston
Embedded scripts require a shell to be present in the BusyBox binary. Allow either ash or hush to be used for this purpose. If both are enabled ash takes precedence. The size of the binary is unchanged in the default configuration: both ash and hush are present but support for embedded scripts isn't compiled into hush. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-27tar: skip 'V' headers (GNU volume label), closes 11526Denys Vlasenko
function old new delta get_header_tar 1696 1690 -6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-27unlzma: fix too-eager corruption checkDenys Vlasenko
function old new delta unpack_lzma_stream 2686 2674 -12 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-27tar: fix too eager autodetection, closes 11531Denys Vlasenko
function old new delta is_suffixed_with - 54 +54 tar_main 1006 1026 +20 open_transformer 92 79 -13 config_file_action 478 458 -20 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/2 up/down: 74/-33) Total: 41 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-02remove FAST_FUNC on a static functionDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-02libarchive: add a function to unpack embedded dataRon Yorston
Similar code to unpack embedded data is used to decompress usage messages, embedded scripts and the config file (in the non-default bbconfig applet). Moving this code to a common function reduces the size of the default build and hides more of the internals of libarchive. function old new delta unpack_bz2_data - 135 +135 bb_show_usage 137 157 +20 get_script_content 32 47 +15 unpack_scripts 119 - -119 unpack_usage_messages 124 - -124 ------------------------------------------------------------------------------ (add/remove: 1/2 grow/shrink: 2/0 up/down: 170/-243) Total: -73 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-01ash: allow shell scripts to be embedded in the binaryDenys Vlasenko
To assist in the deployment of shell scripts it may be convenient to embed them in the BusyBox binary. 'Embed scripts in the binary' takes any files in the directory 'embed', concatenates them with null separators, compresses them and embeds them in the binary. When scripts are embedded in the binary, scripts can be run as 'busybox SCRIPT [ARGS]' or by usual (sym)link mechanism. embed/nologin is provided as an example. function old new delta packed_scripts - 123 +123 unpack_scripts - 87 +87 ash_main 1103 1171 +68 run_applet_and_exit 78 128 +50 get_script_content - 32 +32 script_names - 10 +10 expmeta 663 659 -4 ------------------------------------------------------------------------------ (add/remove: 4/0 grow/shrink: 2/1 up/down: 370/-4) Total: 366 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-09-30unzip: use printable_string() for printing filenamesDenys Vlasenko
function old new delta unzip_main 2726 2792 +66 printable_string2 - 57 +57 identify 4329 4336 +7 expmeta 659 663 +4 add_interface 99 103 +4 beep_main 286 289 +3 changepath 192 194 +2 builtin_type 115 117 +2 devmem_main 469 470 +1 input_tab 1076 1074 -2 create_J 1821 1819 -2 poplocalvars 314 311 -3 doCommands 2222 2214 -8 do_load 918 902 -16 printable_string 57 9 -48 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 8/6 up/down: 146/-79) Total: 67 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-04tar: fix a thinko in prev commit - we need to copy to _unused_ fdDenys Vlasenko
function old new delta vfork_compressor 257 246 -11 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-04tar: handle the case when opened created tarball happens to have fd#0Denys Vlasenko
Reproducer: exec 0>&- exec 1>&- tar czf z.tar.gz FILE function old new delta vfork_compressor 229 257 +28 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-04tar: make source code a bit more terse, no logic changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-24gzip: unbreak FEATURE_GZIP_LEVELS, closes 11171Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-06cpio: if longopts are enabled, accept --null (synonym for -0)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-06tweak help textsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-06-06restore documentation on the build config languageKartik Agaram
Kconfig-language.txt was deleted in commit 4fa499a17b52b back in 2006. Move to docs/ as suggested by Xabier Oneca: http://lists.busybox.net/pipermail/busybox/2014-May/080914.html Also update references to it everywhere. Signed-off-by: Kartik Agaram <akkartik@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-25unlzma: close another SEGV possibilityDenys Vlasenko
function old new delta unpack_lzma_stream 2669 2686 +17 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-22tar: fix interaction of delayed symlink and hardlink creationHarald van Dijk
function old new delta create_or_remember_link - 106 +106 create_links_from_list - 93 +93 find_applet_by_name 124 128 +4 unzip_main 2724 2726 +2 data_extract_all 891 873 -18 create_symlinks_from_list 64 - -64 create_or_remember_symlink 94 - -94 ------------------------------------------------------------------------------ (add/remove: 2/2 grow/shrink: 2/1 up/down: 205/-176) Total: 29 bytes Signed-off-by: Harald van Dijk <harald@gigawatt.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-24unlzma: do emit the error message on bad input, when we exit with 1Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-19unlzma: fix another SEGV caseDenys Vlasenko
function old new delta unpack_lzma_stream 1705 1717 +12 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-15ar: stop using static dataDenys Vlasenko
function old new delta static.ar_long_names 4 - -4 static.ar_long_name_size 4 - -4 get_header_ar 546 532 -14 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 0/1 up/down: 0/-22) Total: -22 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-13dpkg: fix symlink creation, closes 10941Denys Vlasenko
function old new delta get_header_ar 434 442 +8 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-08unlzma: fix segfault on bad archiveDenys Vlasenko
function old new delta unpack_lzma_stream 2647 2653 +6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-08bzip2: fix two crashes on corrupted archivesDenys Vlasenko
As it turns out, longjmp'ing into freed stack is not healthy... function old new delta unpack_usage_messages - 97 +97 unpack_bz2_stream 369 409 +40 get_next_block 1667 1677 +10 get_bits 156 155 -1 start_bunzip 212 183 -29 bb_show_usage 181 120 -61 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 2/3 up/down: 147/-91) Total: 56 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-08lzop: remove method checks which are always true/falseDenys Vlasenko
function old new delta do_lzo_compress 232 224 -8 lzo_compress 531 488 -43 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-51) Total: -51 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-08lzop: buffer several 32-bit writes when we start a new compressed blockDenys Vlasenko
function old new delta lzo_compress 483 531 +48 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-08lzop: reuse stringsDenys Vlasenko
function old new delta lzo_compress 470 483 +13 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/0 up/down: 13/0) Total: 13 bytes text data bss dec hex filename 940011 477 7284 947772 e763c busybox_old 939976 477 7284 947737 e7619 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>