summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2019-11-09taskset: tighten the check for stride valuesDenys Vlasenko
function old new delta taskset_main 986 987 +1 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-11-09taskset: implement stride argumentDenys Vlasenko
function old new delta taskset_main 925 986 +61 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-11-08unxz: show -t in --helpDenys Vlasenko
function old new delta packed_usage 33236 33247 +11 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-11-08taskset: update commentDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-11-01taskset: add support for taking/printing CPU list (-c option)Denys Vlasenko
function old new delta taskset_main 511 855 +344 Based on patch by Fryderyk Wrobel <frd1996@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-11-01hush: restore redirected stdinDenys Vlasenko
function old new delta restore_redirects 52 95 +43 save_fd_on_redirect 243 253 +10 hfopen 90 99 +9 fgetc_interactive 259 261 +2 builtin_type 117 115 -2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 4/1 up/down: 64/-2) Total: 62 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-30ntpd: decrease MIN_FREQHOLD by 2, increase "penalty" for largish offset x2Denys Vlasenko
> 2018-07-25: > ntpd: increase MIN_FREQHOLD by 3 > This means we'll start correcting frequency ~5 minutes after start, > not ~3.5 ones. > With previous settings I still often see largish ~0.7s initial offsets > only about 1/2 corrected before frequency correction kicks in, > resulting in ~200ppm "correction" which is then slowly undone. Review of real-world results of the above shows that with small initial offsets, freq correction can be allowed to kick in sooner, whereas with large (~0.8s) offsets, we still start freq correction a bit too soon. Let's rebalance this a bit. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-27nslookup: implement support for SRV recordsJo-Philipp Wich
Add support for querying and parsing SRV DNS records. function old new delta send_queries 1711 1865 +154 qtypes 72 80 +8 Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-27nslookup: handle replies without RRsJo-Philipp Wich
Under some circumstances, a DNS reply might contain no resource records, e.g. when a valid domain is queried that does not have records of the requested type. Example with nslookup from BIND dnsutils: $ nslookup -q=SRV example.org Server: 10.11.12.13 Address: 10.11.12.13#53 Non-authoritative answer: *** Can't find example.org: No answer Currently the busybox nslookup applet simply prints nothing after the "Non-authoritative answer:" line in the same situation. This change modifies nslookup to either print "Parse error" or "No answer" diagnostics, depending on the parse_reply() return value. function old new delta send_queries 1676 1711 +35 Signed-off-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-26gunzip: fix incorrect decoding of "fixed" inflate blocksDenys Vlasenko
function old new delta huft_build 1008 1022 +14 inflate_block 1253 1256 +3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 17/0) Total: 17 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25hdparm: placate "warning: taking the absolute value of unsigned type"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25vi: placate "warning: shifting a negative signed value is undefined"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25read_key(): placate "warning: shifting a negative signed value is undefined"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25ntpd: abs(tmx.offset) was truncating a "long" typed valueDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25tc: array address is never NULLDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25traceroute: fix gcc-ismDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25suppress a few "unused function" warningsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25netstat: suppress a warning (conversion from 'int' to 'smallint' changes value)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25Makefile.flags: suppress some clang-9 warningsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25clang/llvm 9 fix - do not eliminate a store to a fake "const"Denys Vlasenko
This is *much* better (9 kbytes better) than dropping "*const" optimization trick. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25tar: fix fallout of: change -a from meaning "lzma" to mean "autodetect by ↵Denys Vlasenko
extension" Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-24Remove syscall wrappers around clock_gettime, closes 12091Denys Vlasenko
12091 "Direct use of __NR_clock_gettime is not time64-safe". function old new delta runsv_main 1698 1712 +14 startservice 378 383 +5 get_mono 31 25 -6 date_main 932 926 -6 gettimeofday_ns 17 - -17 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 2/2 up/down: 19/-29) Total: -10 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-22shell: better comments in BASE#nn codeDenys Vlasenko
function old new delta evaluate_string 932 930 -2 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-21shell/ulimit: code shrinkDenys Vlasenko
text data bss dec hex filename 1001949 551 5612 1008112 f61f0 busybox_old 1001906 551 5612 1008069 f61c5 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-20gunzip: code shrink by using int-, not short-sized struct memberDenys Vlasenko
function old new delta inflate_block 1254 1253 -1 inflate_codes 629 621 -8 huft_build 1054 1008 -46 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-55) Total: -55 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-19gzip: code shrinkDenys Vlasenko
huft_build() still has way too many params function old new delta lit - 94 +94 dist - 94 +94 huft_build 1058 1054 -4 inflate_block 1281 1254 -27 cpdext 30 - -30 cplext 31 - -31 cpdist 60 - -60 cplens 62 - -62 ------------------------------------------------------------------------------ (add/remove: 2/4 grow/shrink: 0/2 up/down: 188/-214) Total: -26 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-19gzip: code shrinkDenys Vlasenko
huft_build() has way too many params function old new delta inflate_block 1293 1281 -12 huft_build 1085 1058 -27 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-39) Total: -39 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-18telnet: add disabled code to emit EC and IPDenys Vlasenko
> I'm trying to connect to a Korenix 3005 switch through telnet > for management purposes, and all is well except for the backspace character > - seems like my switch doesn't handle it too well and instead of erasing > the last character all it does is print some garbage to the screen. > I've had the same issue before while using putty, but saw a solution that > suggests to enable "Telnet special commands" in the options menu, and it > worked. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-15brctl: code shrinkDenys Vlasenko
function old new delta show_bridge 323 317 -6 brctl_main 2171 2164 -7 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-13) Total: -13 bytes text data bss dec hex filename 1002083 551 5612 1008246 f6276 busybox_old 1002065 551 5612 1008228 f6264 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-14config: PID_FILE_PATH required for FEATURE_CROND_SPECIAL_TIMESJames Byrne
When crond is built with FEATURE_CROND_SPECIAL_TIMES enabled, it creates a file called 'crond.reboot' at CONFIG_PID_FILE_PATH, but if FEATURE_PIDFILE is disabled, this will be an empty string and the file will be created in the root directory, which is undesirable. This commit makes PID_FILE_PATH depend on FEATURE_CROND_SPECIAL_TIMES as well as FEATURE_PIDFILE so that you get sensible behaviour in crond when FEATURE_PIDFILE is switched off. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-12brctl: tweak help text, fix commentsDenys Vlasenko
function old new delta packed_usage 33255 33236 -19 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-12brctl: fold show_bridge_ports_ into its callerDenys Vlasenko
function old new delta brctl_main 2235 2171 -64 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-12brctl: code shrinkDenys Vlasenko
packed_usage 33253 33255 +2 write_uint 96 90 -6 show_bridge_timer 93 69 -24 brctl_main 2338 2235 -103 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/3 up/down: 2/-133) Total: -131 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-11brctl: add support for showstp commandMartin Lewis
function old new delta brctl_main 974 2339 +1365 show_bridge_timer - 93 +93 static.state_names - 48 +48 printf_xstrtou - 26 +26 packed_usage 33243 33253 +10 show_bridge 333 323 -10 ------------------------------------------------------------------------------ (add/remove: 3/0 grow/shrink: 2/1 up/down: 1542/-10) Total: 1532 bytes text data bss dec hex filename 999868 551 5612 1006031 f59cf busybox_old 1002309 551 5612 1008472 f6358 busybox_unstripped Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-11dpkg-deb: work around bogus error message when working with XZ compressed ↵Denys Vlasenko
packages function old new delta unpack_xz_stream 2309 2317 +8 bb_full_fd_action 464 472 +8 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-09replace: count_strstr - Handle an edge case where sub is emptyMartin Lewis
If sub is empty, avoids an infinite loop. function old new delta count_strstr 45 63 +18 Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-09libbb: Converted safe_read to safe_write formatMartin Lewis
Changed safe_read to be symmetrical to safe_write, it shall never return EINTR because it calls read multiple times, the error is considered transient. function old new delta safe_read 44 57 +13 Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-08runsv: Use 64 prefix syscall if we have toAlistair Francis
Some 32-bit architectures no longer have the 32-bit time_t syscalls. Instead they have suffixed syscalls that returns a 64-bit time_t. If the architecture doesn't have the non-suffixed syscall and is using a 64-bit time_t let's use the suffixed syscall instead. This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel headers. If an architecture only supports the suffixed syscalls, but is still using a 32-bit time_t report a compilation error. This avoids us have to deal with converting between 64-bit and 32-bit values. There are currently no architectures where this is the case. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-08time: Use 64 prefix syscall if we have toAlistair Francis
Some 32-bit architectures no longer have the 32-bit time_t syscalls. Instead they have suffixed syscalls that returns a 64-bit time_t. If the architecture doesn't have the non-suffixed syscall and is using a 64-bit time_t let's use the suffixed syscall instead. This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel headers. If an architecture only supports the suffixed syscalls, but is still using a 32-bit time_t report a compilation error. This avoids us have to deal with converting between 64-bit and 32-bit values. There are currently no architectures where this is the case. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-08date: Use 64 prefix syscall if we have toAlistair Francis
Some 32-bit architectures no longer have the 32-bit time_t syscalls. Instead they have suffixed syscalls that returns a 64-bit time_t. If the architecture doesn't have the non-suffixed syscall and is using a 64-bit time_t let's use the suffixed syscall instead. This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel headers. If an architecture only supports the suffixed syscalls, but is still using a 32-bit time_t fall back to the libc call. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-08udhcpc: fix segmentation fault on empty bin optMichal Kazior
The following caused udhcpc to segfault: busybox udhcpc -i lo -s /dev/null -x 0x3d: function old new delta udhcp_str2optset 629 641 +12 Signed-off-by: Michal Kazior <michal@plume.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-08brctl: add support for showmacs commandMartin Lewis
function old new delta brctl_main 680 974 +294 packed_usage 33167 33187 +20 compare_fdbs - 19 +19 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 2/0 up/down: 333/0) Total: 333 bytes Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-08ln: --no-target-directory implies --no-dereferenceKaarle Ritvanen
as in GNU coreutils Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-08route: fix output of "route -n -A inet6"Tomas Paukrt
The output of the command "route -n -A inet6" may be corrupted due to partially initialized structure snaddr6 in the function INET6_displayroutes. Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-07tee: do not intercept SIGPIPEDenys Vlasenko
GNU tee does this only with -p, which we don't have yet. function old new delta tee_main 306 295 -11 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-04fdisk_aix: fix aliasing warning, comment out unused global variablesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-04fdisk: avoid overflow in "mega/gigabytes" calculation, code shrinkDenys Vlasenko
function old new delta list_disk_geometry 175 145 -30 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-25telnet: fix uninitialized variable bugDenys Vlasenko
function old new delta telnet_main 1236 1238 +2 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-24udhcpc6: add ELAPSED_TIME option to outgoing packetsDenys Vlasenko
function old new delta init_d6_packet 53 121 +68 udhcpc_main 2577 2582 +5 udhcpc6_main 2593 2597 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 77/0) Total: 77 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-22ash: fix BASE###nn bashism for bases 36..64Denys Vlasenko
function old new delta evaluate_string 876 932 +56 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 20:52:26 +0000