1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
|
# This is a basic configuration file, which contains boilerplate options and
# some basic examples. It allows the BIRD daemon to start but will not cause
# anything else to happen.
#
# Please refer to the BIRD User's Guide documentation, which is also available
# online at http://bird.network.cz/ in HTML format, for more information on
# configuring BIRD and adding routing protocols.
# Configure logging
log syslog all;
# log "/var/log/bird.log" { debug, trace, info, remote, warning, error, auth, fatal, bug };
# Set router ID. It is a unique identification of your router, usually one of
# IPv4 addresses of the router. It is recommended to configure it explicitly.
# router id 198.51.100.1;
# Turn on global debugging of all protocols (all messages or just selected classes)
# debug protocols all;
# debug protocols { events, states };
# Turn on internal watchdog
# watchdog warning 5 s;
# watchdog timeout 30 s;
# You can define your own constants
# define my_asn = 65000;
# define my_addr = 198.51.100.1;
# Tables master4 and master6 are defined by default
# ipv4 table master4;
# ipv6 table master6;
# Define more tables, e.g. for policy routing or as MRIB
# ipv4 table mrib4;
# ipv6 table mrib6;
# The Device protocol is not a real routing protocol. It does not generate any
# routes and it only serves as a module for getting information about network
# interfaces from the kernel. It is necessary in almost any configuration.
protocol device {
}
# The direct protocol is not a real routing protocol. It automatically generates
# direct routes to all network interfaces. Can exist in as many instances as you
# wish if you want to populate multiple routing tables with direct routes.
protocol direct {
disabled; # Disable by default
ipv4; # Connect to default IPv4 table
ipv6; # ... and to default IPv6 table
}
# The Kernel protocol is not a real routing protocol. Instead of communicating
# with other routers in the network, it performs synchronization of BIRD
# routing tables with the OS kernel. One instance per table.
protocol kernel {
ipv4 { # Connect protocol to IPv4 table by channel
# table master4; # Default IPv4 table is master4
# import all; # Import to table, default is import all
export all; # Export to protocol. default is export none
};
# learn; # Learn alien routes from the kernel
# kernel table 10; # Kernel table to synchronize with (default: main)
}
# Another instance for IPv6, skipping default options
protocol kernel {
ipv6 { export all; };
}
# Static routes (Again, there can be multiple instances, for different address
# families and to disable/enable various groups of static routes on the fly).
protocol static {
ipv4; # Again, IPv4 channel with default options
# route 0.0.0.0/0 via 198.51.100.10;
# route 192.0.2.0/24 blackhole;
# route 10.0.0.0/8 unreachable;
# route 10.2.0.0/24 via "eth0";
# # Static routes can be defined with optional attributes
# route 10.1.1.0/24 via 198.51.100.3 { rip_metric = 3; };
# route 10.1.2.0/24 via 198.51.100.3 { ospf_metric1 = 100; };
# route 10.1.3.0/24 via 198.51.100.4 { ospf_metric2 = 100; };
}
# Pipe protocol connects two routing tables. Beware of loops.
# protocol pipe {
# table master4; # No ipv4/ipv6 channel definition like in other protocols
# peer table mrib4;
# import all; # Direction peer table -> table
# export all; # Direction table -> peer table
# }
# RIP example, both RIP and RIPng are supported
# protocol rip {
# ipv4 {
# # Export direct, static routes and ones from RIP itself
# import all;
# export where source ~ [ RTS_DEVICE, RTS_STATIC, RTS_RIP ];
# };
# interface "eth*" {
# update time 10; # Default period is 30
# timeout time 60; # Default timeout is 180
# authentication cryptographic; # No authentication by default
# password "hello" { algorithm hmac sha256; }; # Default is MD5
# };
# }
# OSPF example, both OSPFv2 and OSPFv3 are supported
# protocol ospf v3 {
# ipv6 {
# import all;
# export where source = RTS_STATIC;
# };
# area 0 {
# interface "eth*" {
# type broadcast; # Detected by default
# cost 10; # Interface metric
# hello 5; # Default hello perid 10 is too long
# };
# interface "tun*" {
# type ptp; # PtP mode, avoids DR selection
# cost 100; # Interface metric
# hello 5; # Default hello perid 10 is too long
# };
# interface "dummy0" {
# stub; # Stub interface, just propagate it
# };
# };
#}
# Define simple filter as an example for BGP import filter
# See https://gitlab.labs.nic.cz/labs/bird/wikis/BGP_filtering for more examples
# filter rt_import
# {
# if bgp_path.first != 64496 then accept;
# if bgp_path.len > 64 then accept;
# if bgp_next_hop != from then accept;
# reject;
# }
# BGP example, explicit name 'uplink1' is used instead of default 'bgp1'
# protocol bgp uplink1 {
# description "My BGP uplink";
# local 198.51.100.1 as 65000;
# neighbor 198.51.100.10 as 64496;
# hold time 90; # Default is 240
# password "secret"; # Password used for MD5 authentication
#
# ipv4 { # regular IPv4 unicast (1/1)
# import filter rt_import;
# export where source ~ [ RTS_STATIC, RTS_BGP ];
# };
#
# ipv6 { # regular IPv6 unicast (2/1)
# import filter rt_import;
# export filter { # The same as 'where' expression above
# if source ~ [ RTS_STATIC, RTS_BGP ]
# then accept;
# else reject;
# };
# };
#
# ipv4 multicast { # IPv4 multicast topology (1/2)
# table mrib4; # explicit IPv4 table
# import filter rt_import;
# export all;
# };
#
# ipv6 multicast { # IPv6 multicast topology (2/2)
# table mrib6; # explicit IPv6 table
# import filter rt_import;
# export all;
# };
#}
# Template example. Using templates to define IBGP route reflector clients.
# template bgp rr_clients {
# local 10.0.0.1 as 65000;
# neighbor as 65000;
# rr client;
# rr cluster id 1.0.0.1;
#
# ipv4 {
# import all;
# export where source = RTS_BGP;
# };
#
# ipv6 {
# import all;
# export where source = RTS_BGP;
# };
# }
#
# protocol bgp client1 from rr_clients {
# neighbor 10.0.1.1;
# }
#
# protocol bgp client2 from rr_clients {
# neighbor 10.0.2.1;
# }
#
# protocol bgp client3 from rr_clients {
# neighbor 10.0.3.1;
# }
|
