summaryrefslogtreecommitdiff
path: root/proto/ospf/config.Y
AgeCommit message (Collapse)Author
2018-03-07Babel: Fix build with restricted protocol setOndrej Zajicek (work)
All keywords used in Babel config have to be declared locally. Thanks to Leo Vandewoestijne for the bugreport.
2016-11-02OSPF: Use message authentication interfaceOndrej Zajicek (work)
Based on former commit from Pavel Tvrdik
2015-02-21Store protocol config size inside protocol structureOndrej Zajicek
Make proto_config_new() use this info instead of supplied size. Thanks to Alexander V. Chernikov for the patch.
2014-07-21OSPF instance id option and documentation update.Ondrej Zajicek
2014-06-26Temporary integrated OSPF commit.Ondrej Zajicek
2014-04-23Extends multipath support for OSPF.Ondrej Zajicek
Fixes cases where the same network or external route are propagated by several OSPF routes and some other corner cases in next hop construction and ECMP. Allows to specify whether external routes should be merged. Thanks to Peter Christensen for the original patch.
2014-03-31Check validity of interface definitions.Ondrej Zajicek
Thanks to Aleksey Berezin for the bugreport.
2014-02-06Many changes in I/O and OSPF sockets and packet handling.Ondrej Zajicek
I/O: - BSD: specify src addr on IP sockets by IP_HDRINCL - BSD: specify src addr on UDP sockets by IP_SENDSRCADDR - Linux: specify src addr on IP/UDP sockets by IP_PKTINFO - IPv6: specify src addr on IP/UDP sockets by IPV6_PKTINFO - Alternative SKF_BIND flag for binding to IP address - Allows IP/UDP sockets without tx_hook, on these sockets a packet is discarded when TX queue is full - Use consistently SOL_ for socket layer values. OSPF: - Packet src addr is always explicitly set - Support for secondary addresses in BSD - Dynamic RX/TX buffers - Fixes some minor buffer overruns - Interface option 'tx length' - Names for vlink pseudoifaces (vlinkX) - Vlinks use separate socket for TX - Vlinks do not use fixed associated iface - Fixes TTL for direct unicast packets - Fixes DONTROUTE for OSPF sockets - Use ifa->ifname instead of ifa->iface->name
2013-11-22Minor fixes.Ondrej Zajicek
2013-11-22Merge commit 'origin/bfd'Ondrej Zajicek
2013-11-19BFD protocol, ready for release.Ondrej Zajicek
Supports OSPF and BGP and also statically configured sessions.
2013-09-26Fixes build issues without BGP.Ondrej Zajicek
Thanks to Sergey Popovich for the patch.
2013-06-25Implements TTL security for OSPF and RIP.Ondrej Zajicek
Interfaces for OSPF and RIP could be configured to use (and request) TTL 255 for traffic to direct neighbors. Thanks to Simon Dickhoven for the original patch for RIPng.
2013-06-24Better packet priority and traffic class handling.Ondrej Zajicek
Implements support for IPv6 traffic class, sets higher priority for OSPF and RIP outgoing packets by default and allows to configure ToS/DS/TClass IP header field and the local priority of outgoing packets.
2013-06-11Implements OSPF stub router option (RFC 3137).Ondrej Zajicek
Also fixes OSPFv3 routing table calculcation w.r.t. errata 2078 to RFC 5340.
2013-04-17Fixes a compatibility issue in OSPFv2 PtP links.Ondrej Zajicek
BIRD used zero netmask in hello packets on all PtP links, not just on unnumbered ones. This patch fixes it and adds option 'ptp netmask' for overriding the default behavior. Thanks to Alexander V. Chernikov for the original patch.
2013-04-16Better handling of global addresses as configured NBMA neighbors in OSPFv3.Ondrej Zajicek
Configured NBMA neighbors in OSPFv3 should be link-local addresses, old behavior was to silently ignore global ones. The patch allows BIRD to accept global ones, but adds a warning and a documentation notice. Thanks to Wilco Baan Hofman for the bugreport.
2013-02-10A few semicolons added to decrease a number of warnings.Ondrej Filip
2012-10-29Fixes several bugs related to OSPFv3 vlinks.Ondrej Zajicek
2012-05-14Real broadcast mode for OSPFv2.Ondrej Zajicek
2012-05-14Allows to set instance ID for OSPFv3 interfaces.Ondrej Zajicek
2012-03-22Some minor changes to CLI.Ondrej Zajicek
2012-03-16Fixes broken vlinks in OSPF.Ondrej Zajicek
2012-03-16Adds filtering to 'show ospf lsadb' command.Ondrej Zajicek
Thanks Alexander V. Chernikov for the original patch.
2012-01-24Assign default protocol preference via proto_config_new().Ondrej Zajicek
The patch from Alexander V. Chernikov.
2011-11-07Implements protocol templates.Ondrej Zajicek
Based on the patch from Alexander V. Chernikov. Extended to support almost all protocols. Uses 'protocol bgp NAME from TEMPLATE { ... }' syntax.
2011-09-03Fixes for OSPF NSSA handling.Ondrej Zajicek
2011-08-08OSPF NSSA support, inter-area LSA translation.Ondrej Zajicek
2011-07-22OSPF NSSA translator election.Ondrej Zajicek
2011-07-20OSPF NSSA support, part one.Ondrej Zajicek
2011-03-17Vastly improved OSPF reconfiguration.Ondrej Zajicek
Now it can handle a change in iface pattern structure. It can add, remove and reconfigure interfaces, vlinks and areas.
2010-12-24Implements Point-to-MultiPoint interface type for OSPF.Ondrej Zajicek
2010-12-07Multipath support for OSPFOndrej Zajicek
2010-11-19Minor finalizations of link state checks.Ondrej Zajicek
2010-11-13Adds support for iface link detection to OSPF.Ondrej Zajicek
2010-04-24Fixes and enhancements in 'show ospf state' command.Ondrej Zajicek
Now it shows a distance, option to change showing reachable/all network nodes and better handling of AS-external LSAs in multiple areas. The command 'show ospf topology' was changed to not show stubnets in both OSPFv2 and OSPFv3 (previously it displayed stubnets in OSPFv2).
2010-04-21Fixes several problems in OSPF vlink implementation.Ondrej Zajicek
2010-03-29Filter language updates; new route attributes and datatype.Ondrej Zajicek
- Adds bgp_originator_id and bgp_cluster_list route attributes. - Adds dotted quad filter datatype (for router IDs, used by bgp_originator_id and ospf_router_id route attributes). - Fixes pair ~ pair set matching. - Documentation updates.
2010-02-08Shows source (Router ID) for OSPF routes and adds such attribute.Ondrej Zajicek
A sad thing is that we does not have a 'router_id' filter type, so it must be given as decimal number in filters.
2009-11-29Temporary commit.Ondrej Zajicek
2009-11-09Merge branch 'dev' into ospf3Ondrej Zajicek
2009-10-15Implement command to show LSA db.Ondrej Zajicek
2009-08-21Temporary OSPFv3 development commitOndrej Zajicek
2009-08-16Bugfix - each protocol can be compiled separately.Ondrej Filip
2009-07-30Symbols PASSWORDS and BROADCAST not declared for OSPFOndrej Filip
2009-06-18Minor bugfixes.Ondrej Zajicek
2009-06-11Implements an option that allows to change a set of stub networks.Ondrej Zajicek
2009-05-06A change in OSPF and RIP interface patterns.Ondrej Zajicek
Allows to add more interface patterns to one common 'options' section like: interface "eth3", "eth4" { options common to eth3 and eth4 }; Also removes undocumented and unnecessary ability to specify more interface patterns with different 'options' sections: interface "eth3" { options ... }, "eth4" { options ... };
2009-04-08Fixes broken cryptographic authentication in OSPFOndrej Zajicek
Cryptographic authentication in OSPF is defective by design - there might be several packets independently sent to the network (for example HELLO, LSUPD and LSACK) where they might be reordered and that causes crypt. sequence number error. That can be workarounded by not incresing sequence number too often. Now we update it only when last packet was sent before at least one second. This can constitute a risk of replay attacks, but RFC supposes something similar (like time in seconds used as CSN).
2009-01-16Fixes some past config grammar update that caused password related regression.Ondrej Zajicek
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 21:15:06 +0000