summaryrefslogtreecommitdiff
path: root/nest/rt-table.c
AgeCommit message (Collapse)Author
2018-10-01Lib: Add and use ev_new_init()Ondrej Zajicek (work)
2018-07-31BGP: Long-lived graceful restartOndrej Zajicek (work)
The patch implements long-lived graceful restart for BGP, namely draft-uttaro-idr-bgp-persistence-03.
2018-07-06Nest: Fix race condition during reconfiguration, part 2Ondrej Zajicek (work)
If export filter is changed during reconfiguration and a route disappears between reconfiguration and refeed (e.g., if the route is a static route also removed during the reconfiguration), the route is not withdrawn. The issue was fixed for regular channels by an earlier patch. This patch fixes the issue for channels in RA_ACCEPTED mode (first-pass-the-filter), used by BGP with 'secondary' option.
2018-07-03Nest: Fix race condition during reconfigurationOndrej Zajicek (work)
If export filter is changed during reconfiguration and a route disappears between reconfiguration and refeed (e.g., if the route is a static route also removed during the reconfiguration), the route is not withdrawn. The patch fixes that by adding tx reconfiguration timestamp.
2018-06-27Nest: Neighbor cache cleanupsOndrej Zajicek (work)
Simplify neighbor cache code, fix several minor bugs, and improve handling of ONLINK flag.
2018-05-30Nest: Removing separate tmpa from route propagationJan Maria Matejka
This is a fundamental change of an original (1999) concept of route processing inside BIRD. During import/export, there was a temporary ea_list created which was to be used instead of the another one inside the route itself. This led to some confusion, quirks, and strange filter code that handled extended route attributes. Dropping it now. The protocol interface has changed in an uniform way -- the `struct ea_list *attrs` argument has been removed from store_tmp_attrs(), import_control(), rt_notify() and get_route_info().
2018-03-18Nest: Fix table reconfiguration when nettype changesOndrej Zajicek (work)
Thanks to Toke Hoiland-Jorgensen for the bugreport.
2018-02-13Add support for source-specific IPv6 routes to BIRD coreOndrej Zajicek (work)
This patch adds support for source-specific IPv6 routes to BIRD core. This is based on Dean Luga's original patch, with the review comments addressed. SADR support is added to network address parsing in confbase.Y and to the kernel protocol on Linux. Currently there is no way to mix source-specific and non-source-specific routes (i.e., SADR tables cannot be connected to non-SADR tables). Thanks to Toke Hoiland-Jorgensen for the original patch. Minor changes by Ondrej Santiago Zajicek.
2018-02-07Nest: Trivial whitespace cleanupOndrej Zajicek (work)
2018-02-06KRT: Fix IPv6 route learnOndrej Zajicek (work)
Internal table used for route learn was created with non-matching net type for IPv6 kernel proto. Thanks to Toke Hoiland-Jorgensen for the bugreport
2018-01-29Nest: Fix corner case in recursive next hop lookupOndrej Zajicek (work)
Thanks to Svenne Krap for the bugreport.
2018-01-23Merge branch 'master' into int-newOndrej Zajicek (work)
2018-01-16Filter: Allow silent filter executionOndrej Zajicek (work)
A filter should log messages only if executed explicitly (e.g., during route export or route import). When a filter is executed for technical reasons (e.g., to establish whether a route was exported before), it should run silently.
2017-12-10Several minor fixesOndrej Zajicek (work)
2017-12-07Timers: Parse and format functions for microsecond timesOndrej Zajicek (work)
Date/time output (e.g. in logs, show commands) can use %f to specify subsecond time. By default, millisecond precision is used in output.
2017-09-12Backport some minor changes from int-newOndrej Zajicek (work)
2017-07-04Implement onlink flag for nexthopsOndrej Zajicek (work)
Add proper support for per-nexthop onlink flag in routes to handle next hop addresses that are not covered by interface IP ranges. Supported by kernel and static protocols. Thanks to Vincent Bernat for the idea.
2017-05-16Linpool: default allocation sizeJan Moskyto Matejka
2017-05-15Nest: split route show into separate fileJan Moskyto Matejka
2017-04-25Nest: Update of show route cmdOndrej Zajicek (work)
Some code cleanup, multiple bugfixes, allows to specify also channel for 'show route export'. Interesting how such apparenty simple thing like show route cmd has plenty of ugly corner cases.
2017-04-18Check validity of dest w.r.t. net_typeOndrej Zajicek (work)
Allow to define static roa/flow routes without dest.
2017-04-12Nest: Fix route lookupJan Moskyto Matejka
2017-04-12Client: multitable version of show routeJan Moskyto Matejka
2017-03-22BGP: Support for MPLS labels and VPN SAFIOndrej Zajicek (work)
Basic support for SAFI 4 and 128 (MPLS labeled IP and VPN) for IPv4 and IPv6. Should work for route reflector, but does not properly handle originating routes with next hop self. Based on patches from Jan Matejka.
2017-03-17Nexthop: Fixed recursive route mpls label mergingJan Moskyto Matejka
2017-03-09Nest: Minor fixes in show routeOndrej Zajicek (work)
2017-02-24Nexthop: Fixed hostentryJan Moskyto Matejka
2017-02-22Nest: names for nhu_state valuesJan Moskyto Matejka
It took too much time to analyze what's the meaning of nhu_state values so I spent less than the same amount of time documenting it.
2017-02-20Several minor fixesOndrej Zajicek (work)
2016-12-22MPLS: Label stack concatenation for recursive routesJan Moskyto Matejka
2016-12-22Netlink: MPLS routes in kernelJan Moskyto Matejka
Anyway, Bird is now capable to insert both MPLS routes and MPLS encap routes into kernel. It was (among others) needed to define platform-specific AF_MPLS to 28 as this constant has been assigned in the linux kernel. No support for BSD now, it may be added in the future.
2016-12-22Static: Protocol rework wrt. struct nexthop changes; MPLS label supportJan Moskyto Matejka
2016-12-22Nexthop: Support for label stack in nestJan Moskyto Matejka
2016-12-22Merged multipath and single-path data structures.Jan Moskyto Matejka
Dropped struct mpnh and mpnh_*() Now struct nexthop exists, nexthop_*(), and also included struct nexthop into struct rta. Also converted RTD_DEVICE and RTD_ROUTER to RTD_UNICAST. If it is needed to distinguish between these two cases, RTD_DEVICE is equivalent to IPA_ZERO(a->nh.gw), RTD_ROUTER is then IPA_NONZERO(a->nh.gw). From now on, we also explicitely want C99 compatible compiler. We assume that this 20-year norm should be known almost everywhere.
2016-12-07Basic flow specification support (RFC 5575)Ondrej Zajicek (work)
Add flow4/flow6 network and rt-table type and operations, config grammar and static protocol support. Squashed flowspec branch from Pavel Tvrdik.
2016-12-07Merge branch 'int-new-rpki-squashed' (early part) into int-newJan Moskyto Matejka
2016-12-07BGP redesignOndrej Zajicek (work)
Integrated and extensible BGP with generalized AFI handling, support for IPv4+IPv6 AFI and unicast+multicast SAFI.
2016-12-07Check table type at `show route for ...'Pavel Tvrdik
2016-12-07RPKI protocol with one cache server per protocolPavel TvrdĂ­k
The RPKI protocol (RFC 6810) using the RTRLib (http://rpki.realmv6.org/) that is integrated inside the BIRD's code. Implemeted transports are: - unprotected transport over TCP - secure transport over SSHv2 Example configuration of bird.conf: ... roa4 table r4; roa6 table r6; protocol rpki { debug all; # Import both IPv4 and IPv6 ROAs roa4 { table r4; }; roa6 { table r6; }; # Set cache server (validator) address, # overwrite default port 323 remote "rpki-validator.realmv6.org" port 8282; # Overwrite default time intervals retry 10; # Default 600 seconds refresh 60; # Default 3600 seconds expire 600; # Default 7200 seconds } protocol rpki { debug all; # Import only IPv4 routes roa4 { table r4; }; # Set cache server address to localhost, # use default ports tcp => 323 or ssh => 22 remote 127.0.0.1; # Use SSH transport instead of unprotected transport over TCP ssh encryption { bird private key "/home/birdgeek/.ssh/id_rsa"; remote public key "/home/birdgeek/.ssh/known_hosts"; user "birdgeek"; }; } ...
2016-11-08Merge branch 'master' into int-newOndrej Zajicek (work)
2016-11-08Merge tag 'v1.6.2' into int-newOndrej Zajicek (work)
2016-11-01Build: switch on -Wextra, get rid of most of the warningsJan Moskyto Matejka
There are several unresolved -Wmissing-field-initializers on older versions of GCC than 5.1, all of them false positive.
2016-10-12Fixed memory bloating on kernel merge paths together with export filter.Jan Moskyto Matejka
Some memory was being allocated from bad linpool, not from the given one as they should. Thanks to Madhu and Justin Cattle for reporting this.
2016-09-15rt-table: Fix kernel protocol export filter memory bugPavel Tvrdik
Kernel protocol calls rt_export_merged(), which used @rte_update_pool for temporary allocations, supposing it is called from other functions from rt-table.c that handles locking and flushing of the linpool. Therefore, linpool was not flushed properly and memory leaked. Add linpool argument to rt_export_merged() and use @krt_filter_lp when called from kernel protocol. Thanks to Justin Cattle and Alexander Frolkin for the bugreport. (Commit squashed and updated by Ondrej Zajicek)
2016-09-14Nest: Keep multipath next hops sortedOndrej Zajicek (work)
2016-08-16Whitespace fixesPavel Tvrdik
2016-07-17Prepare for longer interface names - clean up of the code.Ondrej Filip
2016-05-12Merge remote-tracking branch 'origin/master' into int-newOndrej Zajicek (work)
2016-05-12Miscellaneous minor fixesOndrej Zajicek (work)
2016-05-12Prog Doc: Complete several missing parametersPavel Tvrdik