summaryrefslogtreecommitdiff
path: root/doc/bird.sgml
AgeCommit message (Collapse)Author
2021-01-06BGP: Deprecate 'missing lladdr' optionOndrej Zajicek (work)
The option is not implemented since transition to 2.0 and no plan to add it. Also remove some deprecated RTS_* valus from documentation. Thanks to Sébastien Parisot for notification.
2020-12-02Filter: Add 'weight' route attributeOndrej Zajicek (work)
Add 'weight' route attribute that allows to get and set ECMP weight of nexthops. Similar to 'gw' attribute, it is limited to the first nexthop, but it is useful for handling BGP multipath, where an ECMP route is merged from multiple regular routes.
2020-11-19Static: Support for multiple routes with the same networkOndrej Zajicek (work)
Add support for proper handling of multiple routes with the same network to the static protocol. Routes are distinguished by internal index, which is assigned automatically (sequentially for routes within each network). Having different route preference or igp_metric attribute is optional.
2020-11-18Doc: Added example of static routes with BGP large communitiesNigel Kukard
2020-11-12BFD: Update documentation about per-session optionsOndrej Zajicek (work)
2020-10-11RPKI: Add 'ignore max length' optionOndrej Zajicek (work)
Add 'ignore max length' option to RPKI protocol, which ignores received max length in ROA records and instead uses max value (32 or 128). This may be useful for implementing loose RPKI check for blackholes.
2020-10-05Doc: Fix missing semicolonsOndrej Zajicek (work)
Thanks to Marco Gartmann for the bugreport.
2020-10-05Doc: Fix typoOndrej Zajicek (work)
Thanks to Sergey Kulikov for the bugreport.
2020-06-03Doc: Add 'ptp address' to OSPF doc overviewKenth Eriksson
2020-05-26OSPF: Fix handling of unnumbered PtPsOndrej Zajicek (work)
This issue has a long history. In 2012, we changed data field for unnumbered PtP links from iface id (specified by RFC) to IP address based on reports of bugs in Quagga that required it, and we used out-of-band information to distinquish unnumberred PtPs with the same local IP address. Then with OSPF graceful restart implementation, we found that we can no longer use out-of-band information, and we need to use only LSAdb info for routing table calculation, but i forgot to finish handling of this case, so multiple unnumbered PtPs with the same local IP addresses were broken. Considering that even recent Mikrotik RouterOS has broken next hop calculation that depends on IP address in PtP link data field, we cannot just switch back to the iface id for unnumbered PtP links. The patch makes two changes: First, it goes back to use out-of-band (position) info for distinguishing local interfaces in SPF when graceful restart is not enabled, while still uses LSAdb-only approach for SPF calculation when graceful restart is enabled. Second, it adds OSPF interface option 'ptp address', which controls whether IP address or iface id is used in data field. It is enabled by default except for unnumbered PtP links with enabled graceful restart. Thanks to Kenth Eriksson for the bugreport and Joakim Tjernlund for suggestions.
2020-05-19Nest: Allow key id 0Ondrej Zajicek (work)
There is nothing in RFCs specifying that id 0 is not allowed. Some implementations does not support it, while some other use key id 0 by default. We allow it but start with key id 1 by default. Thanks to Kenth Eriksson for the bugreport.
2020-05-19RIP: Triggered RIP (demand circuit) documentationOndrej Zajicek (work)
2020-05-18Nest: Implement BGP path mask loop operatorOndrej Zajicek (work)
Implement regex-like '+' operator in BGP path masks to match previous path mask item multiple times. This is useful as ASNs may appear multiple times in paths due to path prepending for traffic engineering purposes.
2020-05-02Filter: Remove quitbird commandOndrej Zajicek (work)
No need for this debug filter command and it can be abused from CLI.
2020-04-08Doc: Update prefix set commentOndrej Zajicek (work)
2020-01-28BFD: Option to specify which class of BFD sessions are acceptedOndrej Zajicek (work)
Allows to configure IPv4/IPv6-only or direct/multihop-only BFD protocol instances.
2019-12-16Doc: Fix documentation of BGP gateway optionOndrej Zajicek (work)
Thanks to Nico Schottelius for the bugreport.
2019-12-09Filter: Add support for src/dst accessors for Flowspec and SADROndrej Zajicek (work)
2019-11-10BGP: Add option to enforce first AS in AS_PATHOndrej Zajicek (work)
This is optional check described in RFC 4271. Although this can be also done by filters, it is widely implemented option in BGP implementations. Thanks to Eugene Bogomazov for the original patch.
2019-11-05Doc: Minor fixOndrej Zajicek (work)
2019-11-05Doc: Add documentation for BGP option 'allow as sets'Ondrej Zajicek (work)
2019-10-26BGP: RFC 8654 got releasedOndrej Zajicek (work)
2019-10-10Doc: Minor documentation fixesOndrej Zajicek (work)
Thanks to Christoph for the bugreport.
2019-10-09BGP: AIGP metric support (RFC 7311)Ondrej Zajicek (work)
2019-10-08Doc: Fix duplicated linesOndrej Zajicek
Thanks to elados93 for the patch.
2019-09-10Doc: Update BGP mask documentationOndrej Zajicek (work)
2019-08-14BGP: implement Adj-RIB-OutOndrej Zajicek (work)
The patch implements optional internal export table to a channel and hooks it to BGP so it can be used as Adj-RIB-Out. When enabled, all exported (post-filtered) routes are stored there. An export table can be examined using e.g. 'show route export table bgp1.ipv4'.
2019-08-12RAdv: Allow solicited RAs to be sent as unicastOndrej Zajicek (work)
Add option to send solicited router advertisements as unicast directly to soliciting nodes instead of as multicast to all-nodes group.
2019-07-31Change 'graceful down' command to 'graceful restart' and update docsOndrej Zajicek (work)
The command initiating planned graceful restart including bird shutdown should be called 'graceful restart' instead of 'graceful down', as the later should be reserved for graceful shutdown in style of RFC 8326.
2019-07-30Doc: Update documentation about VRFs and BFDOndrej Zajicek (work)
2019-07-09Doc: Fix typo in BGP dynamic names feature descriptionVincent Bernat
2019-06-30Doc: OSPF graceful restart optionsOndrej Zajicek (work)
2019-04-30Doc: Dynamic BGPOndrej Zajicek (work)
2019-04-24Small type in doc.Ondrej Filip
2019-04-03BGP: Promiscuous ASN modeOndrej Zajicek (work)
Allow to specify just 'internal' or 'external' for remote neighbor instead of specific ASN. In the second case that means BGP peers with any non-local ASNs are accepted.
2019-03-19Doc: Route attribute cleanupsOndrej Zajicek (work)
2019-03-19BGP: Mandatory option for channelsOndrej Zajicek (work)
Allow to mark channel to be mandatory, and do not allow BGP sessions if no common AFI/SAFI is established.
2019-01-26Doc: Add documentation for OSPF retransmit delay optionOndrej Zajicek (work)
Thanks to Igor Podlesny for notification.
2019-01-26Doc: Remove doc for already removed optionOndrej Zajicek (work)
2018-12-18Perf: Protocol to measure BIRD performance internallyMaria Matějka
This protocol is highly experimental and nobody should use it in production. Anyway it may help you getting some insight into what eats so much time in filter processing.
2018-12-16BGP: Extend 'next hop keep' and 'next hop self' optionsOndrej Zajicek (work)
Extend 'next hop keep' and 'next hop self' options to have boolean values (enabled / disabled) and also values 'ibgp'/ 'ebgp' to restrict it to routes received from IBGP / EBGP. This allows to have it enabled by default in some cases, matches features of other implementations, and allows to handle some strange cases like EBGP border router with 'next hop self' also doing IBGP route reflecting. Change default of 'next hop keep' to enabled for route servers, and 'ibgp' for route reflectors. Update documentation for these options.
2018-12-12Doc: Document log rotation featureOndrej Zajicek (work)
2018-12-12Doc: Document BGP import table optionOndrej Zajicek (work)
2018-12-06Merge branch 'mq-custom' into int-newJan Maria Matejka
2018-12-06Custom route attributesMaria Matejka
For local route marking purposes, local custom route attributes may be defined. These attributes are seamlessly stripped after export filter to every real protocol like Kernel, BGP or OSPF, they however pass through pipes. We currently allow at most 256 custom attributes. This should be much faster than currently used bgp communities for marking routes.
2018-12-04Unix: Change debugging optionsOndrej Zajicek (work)
The old behavior was that enabling debugging did many nontrivial changes in BIRD behavior. The patch changes it that these changes are generally independent. Compiling with --enable-debug now just enables compile-time debug macros, but do not automatically activate debug mode (-d) nor local mode (-l). Debug mode with output to file (-D) do not force foreground mode (-f), therefore there is no need for backgroud option (-b), which is removed. Also fixes a bug when the default log target in -D mode was stderr instead of given debug file.
2018-11-21MRT documentationOndrej Zajicek (work)
2018-11-05Filter: Make ifname attribute modifiableOndrej Zajicek (work)
Allow to change an interface associated with a route by setting ifname attribute. It will also change the route to a direct one.
2018-08-24Doc: Fix description of 'description'Ondrej Zajicek (work)
Thanks to Clemens Schrimpe for the bugreport.
2018-08-21DOC: Remove pipe mode referenceOndrej Zajicek (work)
Pipe mode was removed in 2.0, remove reference to it in the documentation. Thanks to Piotr Wydrych for the bugreport.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 07:27:26 +0000