Age | Commit message (Collapse) | Author |
|
Support abstract socket in sk_unix_connect
Implement SK_UNIX_ACTIVE
|
|
Despite not having defined 'master interface', VRF interfaces should be
treated as being inside respective VRFs. They behave as a loopback for
respective VRFs. Treating the VRF interface as inside the VRF allows
e.g. OSPF to pick up IP addresses defined on the VRF interface.
For this, we also need to tell apart VRF interfaces and regular interfaces.
Extend Netlink code to parse interface type and mark VRF interfaces with
IF_VRF flag.
Based on the patch from Erin Shepherd, thanks!
|
|
|
|
It seems all Fedora packages are built from epel7 branch.
|
|
The test was written by Maria Matejka, thanks!
Run this using
apkg test
|
|
This will allow compatibility on future apkg config updates.
|
|
Mirrors debian patch.
|
|
|
|
Current is 13, remaining blockers:
- Debian 9 @ 11 (EOL)
- Ubuntu 18.04 @ 12 (EOL 2023-04-02)
|
|
|
|
Mirrors Debian package change.
|
|
|
|
|
|
RFC 5549 was obsoleted by RFC 8950.
|
|
Move all bmp_peer_down() calls to one place and make it synchronous with
BGP session down, ensuring that BMP receives peer_down before route
withdraws from flushing.
Also refactor bmp_peer_down_() message generating code.
|
|
Now we use rt_notify() and channels for both feed and notifications,
in both import tables (pre-policy) and regular tables (post-policy).
Remove direct walk in bmp_route_monitor_snapshot().
|
|
Remove special rte_announce_in(), so we can use generic rte_announce()
for bot feed and notifications.
|
|
|
|
- Manage BMP state through bmp_peer, bmp_stream, bmp_table structures
- Use channels and rt_notify() hook for route announcements
- Add support for post-policy monitoring
- Send End-of-RIB even when there is no routes
- Remove rte_update_in_notify() hook from import tables
- Update import tables to support channels
- Add bmp_hack (no feed / no flush) flag to channels
|
|
|
|
No need for *_begin(), *_commit(), and *_end() hooks. The hook *_notify()
is sufficient for everything.
|
|
The problem was the "/" symbol in the prefix mask that finished the formatting definition prematurely.
|
|
And use WALK_LIST macro
|
|
Currently one can use only a predefined set of advertised options in RAdv
protocol, which are supported by BIRD configuration. It would be convenient
to be able to specify other possible options at least manually as a blob
so one should not wait until it is supported in the code, released, etc.
This idea is inspired by presentation by Ondřej Caletka at CSNOG, in which
he noticed the lack of either PREF64 option or possibility to add custom
options in various software.
The patch makes it possible to define such options with the syntax:
other type <num> <bytestring>
|
|
Hexadecimal bytestring literals have minimal length to not collide
with IP addresses or regular (hexadecimal) number literals.
Allow to use shorter literals with explicit hex: prefix.
|
|
|
|
|
|
Thanks to Kobayashi_Bairuo <noc@tohunet.com> for reporting.
|
|
When an OPEN message without capability options was parsed, the remote
role field was not initialized with the proper (non-zero) default value,
so it was interpreted as if 'provider' was announced.
Thanks to Mikhail Grishin for the bugreport.
|
|
It is necessary for IPv4 over IPv6 nexthop support on FreeBSD,
and RTA_VIA is not really related to MPLS.
It breaks build for some very old systems like Debian 8 and CentOS 7,
but we generally do not support older kernels than 4.14 LTS anyway.
|
|
Remove build-debian-8, build-ubuntu-14_04, build-centos-7, pkg-debian-9,
and pkg-centos-7 targets.
Debian 8, Ubuntu 14.04, and CentOS 7 have unsupported kernels, Debian 9
has okay kernel, but is EOL.
|
|
|
|
Add internal BMP functions with plicit bmp_proto *p as first argument,
which allows using TRACE() macro. Keep list of BMP instances and call
internal functions. Old BMP functions are wrappers that call internal
functions for all enabled BMP instances.
Extract End-of-RIB mark into separate function.
Based on patch from Michal Zagorski <mzagorsk@akamai.com>. Thanks!
|
|
Use existing %t printf code and move 'ms' in CLI output to table header.
|
|
This adds support to the Babel protocol for the RTT extension specified
in draft-ietf-babel-rtt-extension. While this extension is not yet at the
RFC stage, it is one of the more useful extensions to Babel[0], so it
seems worth having in Bird as well.
The extension adds timestamps to Hello and IHU TLVs and uses these to
compute an RTT to each neighbour. An extra per-neighbour cost is then
computed from the RTT based on a minimum and maximum interval and cost
value specified in the configuration. The primary use case for this is
improving routing in a geographically distributed tunnel-based overlay
network.
The implementation follows the babeld implementation when picking
constants and default configuration values. It also uses the same RTT
smoothing algorithm as babeld, and follows it in adding a new 'tunnel'
interface type which enables RTT by default.
[0] https://alioth-lists.debian.net/pipermail/babel-users/2022-April/003932.html
|
|
Add a current_time_now() function which gets an immediate monotonic
timestamp instead of using the cached value from the event loop. This is
useful for callers that need precise times, such as the Babel RTT
measurement code.
Minor changes by committer.
|
|
The buffer code in bmp_buffer_grow(), reuse the MRT buffer handling code.
Based on comments by Michal Zagorski <mzagorsk@akamai.com>, Thanks!
|
|
Based on patches from Michal Zagorski <mzagorsk@akamai.com> co-authored
with Pawel Maslanka <pmaslank@akamai.com>. Thanks!
|
|
Also, do not initialize it to IPA_NONE4, use regular IPA_NONE.
|
|
Also remove unused local and ip_post_policy options.
Co-authored with Pawel Maslanka <pmaslank@akamai.com>.
Minor changes by committer.
|
|
Based on patches from Michal Zagorski <mzagorsk@akamai.com> co-authored
with Pawel Maslanka <pmaslank@akamai.com>. Thanks!
|
|
Fix issue with missing AF cap (e.g. IPv4 unicast when no capabilities
are announced).
Add Linpool save/restore action similar to bgp_create_update().
Based on patch from Michal Zagorski <mzagorsk@akamai.com> co-authored
with Pawel Maslanka <pmaslank@akamai.com>. Thanks!
|
|
When an OPEN message without capability options was parsed, the remote
role field was not initialized with the proper (non-zero) default value,
so it was interpreted as if 'provider' was announced.
Thanks to Mikhail Grishin for the bugreport.
|
|
Backport some changes from branch oz-parametric-hashes. Replace naive
hash function for IPv6 addresses, fix hashing of VPNx (where upper half
of RD was ignored), fix hashing of MPLS labels (where identity was used).
|
|
Basic fib_get() / fib_find() test for random prefixes, FIB_WALK() test,
and benchmark for fib_find(). Also generalize and reuse some code from
trie tests.
|
|
The BMP protocol needs OPEN messages of established BGP sessions to
construct appropriate Peer Up messages. Instead of saving them internally
we use OPEN messages stored in BGP instances. This allows BMP instances
to be restarted or enabled later.
Because of this change, we can simplify BMP data structures. No need to
keep track of BGP sessions when we are not started. We have to iterate
over all (established) BGP sessions when the BMP session is established.
This is just a scaffolding now, but some kind of iteration would be
necessary anyway.
Also, the commit cleans up handling of msg/msg_length arguments to be
body/body_length consistently in both rx/tx and peer_up/peer_down calls.
|
|
These are necessary for BMP Peer UP message and it is better to keep them
in BGP than in BMP (so BMP could be restarted or added later).
|
|
For whatever reason, parser allocated a symbol for every parsed keyword
in each scope. That wasted time and memory. The effect is worsened with
recent changes allowing local scopes, so keywords often promote soft
scopes (with no symbols) to real scopes.
Do not allocate a symbol for a keyword. Take care of keywords that could
be promoted to symbols (kw_sym) and do it explicitly.
|
|
The symbol table used just symbol name as a key, and used a trick with
active flag to find symbols in active scopes with one hash table lookup.
The disadvantage is that it can degenerate to O(n) for negative queries
in situations where are many symbols with the same name in different
scopes.
Thanks to Yanko Kaneti for the bugreport.
|
|
|