| Age | Commit message (Collapse) | Author |
|---|
|
These routines detect the export congestion (as defined by configurable
thresholds) and propagate the state to readers. There are no readers for
now, they will be added in following commits.
|
|
|
|
Some unit tests weren't initializing the birdloop, trying to write the
birdloop ping into stdin. Fixed this and also forced stdin close on
startup of every test just to be sure that CI and local build behave the
same in this. (CI was failing on this while local build not.)
|
|
|
|
|
|
|
|
This reverts commit 6e841b3153565632b6753f6b1fe74850c37f2808.
|
|
In multithreaded environment, we need to pass messages between workers.
This is done by queuing events to their respective queues. The
double-linked list is not really useful for that as it needs locking
everywhere.
This commit rewrites the event subsystem to use a single-linked list
where events are enqueued by a single atomic instruction and the queue
is processed after atomically moving the whole queue aside.
|
|
|
|
|
|
|
|
|
|
|
|
There were more conflicts that I'd like to see, most notably in route
export. If a bisect identifies this commit with something related, it
may be simply true that this commit introduces that bug. Let's hope it
doesn't happen.
|
|
The invalid routes were filtered out before they could ever get
exported, yet some of the routines need them available, e.g. for
display or import reload.
Now the invalid routes are properly exported and dropped in channel
export routines instead.
|
|
|
|
|
|
|
|
|
|
Introduced by 13ef5e53dd4a98c80261139b4c9ce4b1074cac40, the CLI was not
properly cleaned up when the command finished, causing BIRD to not parse
any other command after "show route".
|
|
|
|
|
|
This reverts commit 44f26c49f966ca842ff9af55468de0b98c44b73e.
|
|
For BGP LLGR purposes, there was an API allowing a protocol to directly
modify their stale routes in table before flushing them. This API was
called by the table prune routine which violates the future locking
requirements.
Instead of this, BGP now requests a special route export and reimports
these routes into the table, allowing for asynchronous execution without
locking the table on export.
|
|
Until now, we were marking routes as REF_STALE and REF_DISCARD to
cleanup old routes after route refresh. This needed a synchronous route
table walk at both beginning and the end of route refresh routine,
marking the routes by the flags.
We avoid these walks by using a stale counter. Every route contains:
u8 stale_cycle;
Every import hook contains:
u8 stale_set;
u8 stale_valid;
u8 stale_pruned;
u8 stale_pruning;
In base_state, stale_set == stale_valid == stale_pruned == stale_pruning
and all routes' stale_cycle also have the same value.
The route refresh looks like follows:
+ ----------- + --------- + ----------- + ------------- + ------------ +
| | stale_set | stale_valid | stale_pruning | stale_pruned |
| Base | x | x | x | x |
| Begin | x+1 | x | x | x |
... now routes are being inserted with stale_cycle == (x+1)
| End | x+1 | x+1 | x | x |
... now table pruning routine is scheduled
| Prune begin | x+1 | x+1 | x+1 | x |
... now routes with stale_cycle not between stale_set and stale_valid
are deleted
| Prune end | x+1 | x+1 | x+1 | x+1 |
+ ----------- + --------- + ----------- + ------------- + ------------ +
The pruning routine is asynchronous and may have high latency in
high-load environments. Therefore, multiple route refresh requests may
happen before the pruning routine starts, leading to this situation:
| Prune begin | x+k | x+k | x -> x+k | x |
... or even
| Prune begin | x+k+1 | x+k | x -> x+k | x |
... if the prune event starts while another route refresh is running.
In such a case, the pruning routine still deletes routes not fitting
between stale_set and and stale_valid, effectively pruning the remnants
of all unpruned route refreshes from before:
| Prune end | x+k | x+k | x+k | x+k |
In extremely rare cases, there may happen too many route refreshes
before any route prune routine finishes. If the difference between
stale_valid and stale_pruned becomes more than 128 when requesting for
another route refresh, the routine walks the table synchronously and
resets all the stale values to a base state, while logging a warning.
|
|
|
|
The learnt routes are now pushed all into the connected table, not only
the best one. This shouldn't do any damage in well managed setups, yet
it should be noted that it is a change of behavior.
If anybody misses a feature which they implemented by misusing this
internal learn table, let us know, we'll consider implementing it in a
better way.
|
|
Until now, if export table was enabled, Nest was storing exactly the
route before rt_notify() was called on it. This was quite sloppy and
spooky and it also wasn't reflecting the changes BGP does before
sending. And as BGP is storing the routes to be sent anyway, we are
simply keeping the already-sent routes in there to better rule out
unneeded reexports.
Some of the route attributes (IGP metric, preference) make no sense in
BGP, therefore these will be probably replaced by something sensible.
Also the nexthop shown in the short output is the BGP nexthop.
|
|
It's now possible to pause iteration through hash. This requires
struct hash_iterator to be allocated somewhere handy.
The iteration itself is surrounded by HASH_WALK_ITER and
HASH_WALK_ITER_END. Call HASH_WALK_ITER_PUT to ask for pausing; it may
still do some more iterations until it comes to a suitable pausing
point. The iterator must be initalized to an empty structure. No cleanup
is needed if iteration is abandoned inbetween.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For loops allow to iterate over elements in compound data like BGP paths
or community lists. The syntax is:
for [ <type> ] <variable> in <expr> do <command-body>
|
|
Allow variable declarations mixed with code, also in nested blocks with
proper scoping, and with variable initializers. E.g:
function fn(int a)
{
int b;
int c = 10;
if a > 20 then
{
b = 30;
int d = c * 2;
print a, b, c, d;
}
string s = "Hello";
}
|
|
When f_line is done, we have to pop the stack frame. The old code just
removed nominal number of args/vars. Change it to use stored ventry value
modified by number of returned values. This allows to allocate variables
on a stack frame during execution of f_lines instead of just at start.
But we need to know the number of returned values for a f_line. It is 1
for term, 0 for cmd. Store that to f_line during linearization.
|
|
Command sequences in curly braces used a separate nonterminal in grammar.
Handle them as a regular command.
|
|
When a new variable used the same name as an existing symbol in an outer
scope, then offset number was defined based on a scope of the existing
symbol ($3) instead of a scope of the new symbol (sym_). That can lead
to two variables sharing the same memory slot.
|
|
Soft scopes are anonymous scopes that most likely do not contain any
symbol, so allocating regular scope is postponed when it is really
needed.
|
|
Direct recursion almost worked, just crashed on function signature check.
Split function parsing such that function signature is saved before
function body is processed. Recursive calls are marked so they can be
avoided during f_same() and similar code walking.
Also, include tower of hanoi solver as a test case.
|
|
Equality comparison is defined on all values, even of different
types, but we still want to do constant promotion if possible.
|
|
Add literal for empty set [], which works both for tree-based sets
and prefix sets by using existing constant promotion mechanism.
Minor changes by committer.
|
|
Use struct f_val as a common argument for as_path_filter(), as suggested
by Alexander Zubkov. That allows to use NULL sets as valid arguments.
|
|
All instructions with a return value (i.e. expressions, ones with
non-zero outval, third argument in INST()) should declare their return
type. Check that automatically by M4 macros.
Set outval of FI_RETURN to 0. The instruction adds one value to stack,
but syntactically it is a statement, not an expression.
Add fake return type declaration to FI_CALL, otherwise the automatic
check would fail builds.
|
|
|
|
Keep list of function parameters in f_line and use it to verify
types of arguments for function calls. Only static type checks
are implemented.
|
