summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-09Nest: Allow iface-only neighborsOndrej Zajicek (work)
2017-02-24Nexthop: Fixed hostentryJan Moskyto Matejka
2017-02-22Nest: names for nhu_state valuesJan Moskyto Matejka
It took too much time to analyze what's the meaning of nhu_state values so I spent less than the same amount of time documenting it.
2017-02-22Babel post-merge fixesJan Moskyto Matejka
2017-02-22Merge branch 'int-new' into nexthop-mergedJan Moskyto Matejka
2017-02-20BGP: Update RFC referencesOndrej Zajicek (work)
2017-02-20Several minor fixesOndrej Zajicek (work)
2017-02-08Merge branch 'master' into int-newOndrej Zajicek (work)
2017-02-07BGP: Minor cleanupsOndrej Zajicek (work)
2017-01-24Filter: Fix missing case for !~ operatorOndrej Zajicek (work)
Thanks to Vincent Bernat for the patch.
2017-01-24BGP: Partial support for IPv4 routes with IPv6 next hop (RFC 5549)Ondrej Zajicek (work)
Mostly capability signalling
2017-01-22BGP: Support for AS confederations (RFC 5065)Ondrej Zajicek (work)
2017-01-17Fix IP_HDRINCL usage on FreeBSD 11Ondrej Zajicek (work)
FreeBSD 11 changed endianity of ip_len field from host order to network order. Also DragonFly BSD allegedly expects network order here. Thanks to Olivier Cochard-Labbé for the patch.
2017-01-03Minor cleanupsOndrej Zajicek (work)
2016-12-22VPN4 and VPN6 literalsJan Moskyto Matejka
From now on, protocol static accepts VPN4 and VPN6 addressess. With some concerns about VPN6 Route Distinguishers, I finally chose to have the same format as for VPN4 (where it is defined by RFC 4364).
2016-12-22MPLS: Label stack concatenation for recursive routesJan Moskyto Matejka
2016-12-22Netlink: MPLS routes in kernelJan Moskyto Matejka
Anyway, Bird is now capable to insert both MPLS routes and MPLS encap routes into kernel. It was (among others) needed to define platform-specific AF_MPLS to 28 as this constant has been assigned in the linux kernel. No support for BSD now, it may be added in the future.
2016-12-22Static: Protocol rework wrt. struct nexthop changes; MPLS label supportJan Moskyto Matejka
2016-12-22MPLS: added net_addr_mpls variant of net_addrJan Moskyto Matejka
2016-12-22Nexthop: Support for label stack in nestJan Moskyto Matejka
2016-12-22Removing (struct rta)->cast. Never used.Jan Moskyto Matejka
2016-12-22Merged multipath and single-path data structures.Jan Moskyto Matejka
Dropped struct mpnh and mpnh_*() Now struct nexthop exists, nexthop_*(), and also included struct nexthop into struct rta. Also converted RTD_DEVICE and RTD_ROUTER to RTD_UNICAST. If it is needed to distinguish between these two cases, RTD_DEVICE is equivalent to IPA_ZERO(a->nh.gw), RTD_ROUTER is then IPA_NONZERO(a->nh.gw). From now on, we also explicitely want C99 compatible compiler. We assume that this 20-year norm should be known almost everywhere.
2016-12-21NEWS and version updatev1.6.3Ondrej Zajicek (work)
2016-12-20Netlink: fix occasional netlink hangs on busy machinesJan Moskyto Matejka
2016-12-20BGP: Report capabilities in show protocols allOndrej Zajicek (work)
2016-12-15OSPF: Fix ECMP external mergingOndrej Zajicek (work)
The variable nfa is not cleaned before each loop iteration and can have a wrong value of nfa.nhs_reuse from the previous step. Thanks to Bernardo Figueiredo for the bugreport and analysis.
2016-12-13Minor cleanupsOndrej Zajicek (work)
2016-12-13OSPF: Fix net-summary origination combined with stubnet optionOndrej Zajicek (work)
Stubnet nodes in OSPF FIB were removed during rt_sync(), but the pointer remained in top_hash_entry.nf, so net-summary LSA origination was confused, reported 'LSA ID collision' and net-summary LSAs were not originated properly. Thanks to Naveen Chowdary Yerramneni for bugreport and analysis.
2016-12-10Babel: Update to integrated branchOndrej Zajicek (work)
2016-12-07Documentation build system fixv2.0.0-pre0Ondrej Filip
2016-12-07NEWS and version updateOndrej Zajicek (work)
2016-12-07Doc: Add MP-BGP example config fileOndrej Zajicek (work)
2016-12-07BGP: Add support for flowspec (RFC 5575)Ondrej Zajicek (work)
2016-12-07Doc: Example simple configJan Moskyto Matejka
2016-12-07Tests: Fix buildOndrej Zajicek (work)
2016-12-07Client: No need for birdlib functionsOndrej Zajicek (work)
2016-12-07Basic flow specification support (RFC 5575)Ondrej Zajicek (work)
Add flow4/flow6 network and rt-table type and operations, config grammar and static protocol support. Squashed flowspec branch from Pavel Tvrdik.
2016-12-07RPKI: fixed some of the extended warningsJan Moskyto Matejka
2016-12-07Merge branch 'int-new-rpki-squashed' (early part) into int-newJan Moskyto Matejka
2016-12-07BGP redesignOndrej Zajicek (work)
Integrated and extensible BGP with generalized AFI handling, support for IPv4+IPv6 AFI and unicast+multicast SAFI.
2016-12-07LibSSH may be switched off together with RPKIJan Moskyto Matejka
2016-12-07SSH: Commented quirk based on undocumented behavior of LibSSHJan Moskyto Matejka
2016-12-07Make: upgrade Babel makefilesJan Moskyto Matejka
2016-12-07filter/test.conf: add ROA check and operator testsPavel Tvrdik
2016-12-07Add `.maxlen' operator to all ROA prefixes in filtersPavel Tvrdik
Example: bird> eval (1.2.0.0/16 max 20 as 1234).maxlen 20 Todo: Should be described in user docs
2016-12-07Add `.asn' operator to all ROA prefixes in filtersPavel Tvrdik
Example: bird> eval (1.2.0.0/16 max 20 as 1234).asn 1234 Todo: Should be described in user docs
2016-12-07Check table type at `show route for ...'Pavel Tvrdik
2016-12-07RPKI protocol with one cache server per protocolPavel Tvrdík
The RPKI protocol (RFC 6810) using the RTRLib (http://rpki.realmv6.org/) that is integrated inside the BIRD's code. Implemeted transports are: - unprotected transport over TCP - secure transport over SSHv2 Example configuration of bird.conf: ... roa4 table r4; roa6 table r6; protocol rpki { debug all; # Import both IPv4 and IPv6 ROAs roa4 { table r4; }; roa6 { table r6; }; # Set cache server (validator) address, # overwrite default port 323 remote "rpki-validator.realmv6.org" port 8282; # Overwrite default time intervals retry 10; # Default 600 seconds refresh 60; # Default 3600 seconds expire 600; # Default 7200 seconds } protocol rpki { debug all; # Import only IPv4 routes roa4 { table r4; }; # Set cache server address to localhost, # use default ports tcp => 323 or ssh => 22 remote 127.0.0.1; # Use SSH transport instead of unprotected transport over TCP ssh encryption { bird private key "/home/birdgeek/.ssh/id_rsa"; remote public key "/home/birdgeek/.ssh/known_hosts"; user "birdgeek"; }; } ...
2016-12-07Client: Includes stdlib.h for malloc()Pavel Tvrdik
2016-11-30filter/test.conf: Minor changes in order of callsPavel Tvrdik
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 19:38:43 +0000