summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-30BGP: Output Local AS number in show protocolOndrej Zajicek (work)
Useful for implementation of agents implementing the SNMP-BGP MIB, which requires the local AS of a session to be specified. Thanks to Jan-Philipp Litza for the patch.
2019-04-30BGP: Dynamic BGPOndrej Zajicek (work)
Support for dynamically spawning BGP protocols for incoming connections. Use 'neighbor range' to specify range of valid neighbor addresses, then incoming connections from these addresses spawn new BGP instances.
2019-04-24Small type in doc.Ondrej Filip
2019-04-12OSPFv3: Fix some overlooked cases in IPv4 modeOndrej Zajicek (work)
Prefixes with max length (/32) were not handled properly. Thanks to bauen1 for the bugreport.
2019-04-08BGP: Handle corner cases in event orderingOndrej Zajicek (work)
When BGP connection is opened, it may happen that rx hook (with remote OPEN) is called before tx hook (for local OPEN). Therefore, we need to do internal changes (like setting local_caps) synchronously with OPENSENT transition and we need to ensure that OPEN is sent before KEEPALIVE.
2019-04-03BGP: Promiscuous ASN modeOndrej Zajicek (work)
Allow to specify just 'internal' or 'external' for remote neighbor instead of specific ASN. In the second case that means BGP peers with any non-local ASNs are accepted.
2019-04-02BGP: Separate runtime and config usage of local/remote ip and as fieldsOndrej Zajicek (work)
2019-03-19Doc: Route attribute cleanupsOndrej Zajicek (work)
2019-03-19BGP: Mandatory option for channelsOndrej Zajicek (work)
Allow to mark channel to be mandatory, and do not allow BGP sessions if no common AFI/SAFI is established.
2019-03-18BGP: Handle case where capabilites are not usedOndrej Zajicek (work)
If peer does not announce capabilities at all, or when we have capabilities disabled, handle that as implicit IPv4 unicast.
2019-03-18Build: Automatic dependency tracking for generated filesMaria Matejka
2019-03-14Nest: Update handling of temporary attributesOndrej Zajicek (work)
The temporary atttributes are no longer removed by ea_do_prune(), but they are undefined by store_tmp_attrs() protocol hooks. This fixes several bugs where temporary attributes were removed when they should not or not removed when they should be. The flag EAF_TEMP is no longer needed and was removed. Update all protocol make_tmp_attrs() / store_tmp_attrs() hooks to use helper functions and to handle unset attributes properly. Also fix some related bugs like improper handling of empty eattr list.
2019-03-06OSPF: Improved handling of tmpattrsOndrej Zajicek (work)
Keep track of whether OSPF tmpattrs are actually defined for given route (using flags in rte->pflags). That makes them behave more like real eattrs so a protocol can define just a subset of them or they can be undefined by filters. Do not set ospf_metric2 for other than type 2 external OSPF routes and do not set ospf_tag for non-external OSPF routes. That also fixes a bug where internal/inter-area route propagated from one OSPF instance to another is initiated with infinity ospf_metric2. Thanks to Yaroslav Dronskii for the bugreport.
2019-02-26NEWS and version updatev2.0.4Ondrej Zajicek (work)
2019-02-22Conf: Switch for faster (and slightly bigger) lexerMaria Matejka
2019-02-22Nest: Do not compare rte.flags during rte_update()Ondrej Zajicek (work)
Route flags are mosty internal state of rtable, they are not significant to whether a route has changed. With the old code, all routes received as a part of enhanced route refresh are always re-announced to other peers due to change in REF_STALE.
2019-02-19HTML are no longer generated in srcdirOndrej Zajicek (work)
2019-02-19Doc: Detect SP/OpenSP automaticallyOndrej Zajicek (work)
2019-02-19Nest: Prevent withdraws from propagation back to source protocol (for ↵Ondrej Zajicek (work)
accepted mode) Update for one of previous patches, handles the the issue for first-accepted mode of route propagation.
2019-02-17OSPF: Reset LSAs during area type changeOndrej Zajicek (work)
When area is reconfigured to a different type, we need to flush LSAs as they may not be valid (e.g. NSSA-LSA for non-NSSA area). Also, when we have have just one OSPF area and that changes type, we could restart OSPF as there is no state to keep anyway. That solves issue with different handling of external routes exported to OSPF based of main area type.
2019-02-13OSPF: Basic support for DN-bit handling (RFC 4576)Ondrej Zajicek (work)
External LSAs originated by OSPF routers with VPN-PE behavior enabled are marked by DN flag and they are ignored by other OSPF routers with VPN-PE enabled.
2019-02-09OSPF: Do not originate Router-Information LSAOndrej Zajicek (work)
As we do not have much usage for it yet.
2019-02-09Merge remote-tracking branch 'origin/mq-opt'Ondrej Zajicek (work)
2019-02-05Nest: Improve export counter handlingOndrej Zajicek (work)
One of previous workarounds for phantom route avoidance breaks export counters by expanding sending of spurious withdraws, which are send when we are not sure whether we have advertised that routes in the past. If not, then export counter is decreased, but it was not increased before, so it overflows under zero. The patch fixes that by sendung spurious withdraws, but not counting them on export counter. That may lead to error in the other direction, but that happens only as a race condition (i.e., in normal operation filters return proper values about old route export state).
2019-02-05Nest: Report preferred counters also when 'import keep filtered' is enabledOndrej Zajicek (work)
Thanks to Michal Nowak for reporting the issue.
2019-02-03OSPF: Send direct acknowledgements as unicastOndrej Zajicek (work)
Direct acknowledgements should be send as unicast to a corresponding neighbor. Only delayed acks should be send as multicast to all/designated routers.
2019-02-03OSPF: Reject duplicate DBDES packets after dead intervalOndrej Zajicek (work)
Master may free last DBDES packet immediately. Slave must wait dead interval before freeing last DBDES packet and then reject duplicate DBDES packets with SeqNumberMismatch.
2019-02-03OSPF: DD seqnum should be initialized only for first attemptsOndrej Zajicek (work)
After SeqNumberMismatch/BadLSReq, we should continue with the old seqnum++. The old code tries to do that by n->adj, but it was set nowhere.
2019-02-03OSPF: Reject DBDES packets with non-matching MTUOndrej Zajicek (work)
As it is specified in RFC 2328. The old code just provided warning.
2019-02-02Nest: Reestablish preferred countersOndrej Zajicek (work)
2019-02-01Perf: Added forgotten all-protocol optionsMaria Matejka
2019-01-31Nest: FIB rehash values tweaked for better performanceMaria Matejka
2019-01-31Perf: Prune the table after every loop to have clean state.Maria Matejka
2019-01-31Perf: Write also BIRD version to have all the needed data in the logfileMaria Matejka
2019-01-31Nest: Don't lookup net in table before filters are run.Maria Matejka
Using dummy net instead. This should help with performance on rejected routes.
2019-01-30Nest: Prevent withdraws from propagation back to source protocolOndrej Zajicek (work)
The earlier fix loosen conditions for not running filters on old route when deciding about route propagation to a protocol to avoid issues with ghost routes in some race conditions. Unfortunately, the fix also caused back-propagation of withdraws. For regular updates, back-propagation is prevented in import_control hooks, but these are not called on withdraws. For them, import_control hooks are called on old routes instead, changing (old, NULL) notification to (NULL, NULL), which is ignored. By not calling export processing in some cases, the withdraw is not ignored and is back-propagated. This patch fixes that by contract conditions so the earlier fix is not applied to back-propagated updates.
2019-01-26Doc: Add documentation for OSPF retransmit delay optionOndrej Zajicek (work)
Thanks to Igor Podlesny for notification.
2019-01-26Doc: Remove doc for already removed optionOndrej Zajicek (work)
2019-01-26BGP: Cleanup channels when going downOndrej Zajicek (work)
When going up, uncleaned old channel state may trigger unexpected conditions crashing bird.
2019-01-24OSPF: Opaque LSAs and Router Information LSAOndrej Zajicek (work)
Add support for OSPFv2 Opaque LSAs (RFC 5250) and for Router Information LSA (RFC 7770). The second part is here mainly for testing opaque LSAs.
2019-01-17Nest: Don't make tmp_attr before preexport is calledJan Maria Matejka
2019-01-05NEWS and version updatev2.0.3Ondrej Zajicek (work)
2019-01-04Unix: Remove removed option from helpOndrej Zajicek (work)
Also includes minor cleanup of help.
2019-01-04BSD: Fix TCP-MD5 code on current FreeBSD kernelsOndrej Zajicek (work)
Current FreeBSD kernels require SA records for both directions. Thanks to Joseph Mulloy and Andrey V. Elsukov for reporting and solving the issue.
2019-01-03Doc: README and INSTALL updateOndrej Zajicek (work)
Minor cleanups, updates and clarifications. Also removes (incomplete and well-known) build steps from README, as they are better described in INSTALL.
2019-01-02BGP: Better dispatch of incoming connectionsOndrej Zajicek (work)
Since v2 we have multiple listening BGP sockets, and each BGP protocol has associated one of them. Use listening socket that accepted the incoming connection as a key in the dispatch process so only BGP protocols assocaited with that listening socket can be selected. This is necesary for proper dispatch when VRFs are used.
2019-01-02BGP: Postpone setting link_addrOndrej Zajicek (work)
It may happen that the LLv6 address for given iface is not defined during BGP start, so we postpone the check to the the session establishment.
2018-12-28KRT: Fix debug messages in netlink codeArthur Gautier
2018-12-18IO: Workaround for broken FreeBSD behaviorOndrej Zajicek (work)
FreeBSD silently changes TTL to 1 when MSG_DONTROUTE is used, even when it is explicitly set to another value. That breaks TTL security sockets, including BFD which always uses TTL 255. Bad FreeBSD!
2018-12-18Perf: Protocol to measure BIRD performance internallyMaria Matějka
This protocol is highly experimental and nobody should use it in production. Anyway it may help you getting some insight into what eats so much time in filter processing.