diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/bird.sgml | 112 | ||||
| -rw-r--r-- | doc/reply_codes | 1 |
2 files changed, 70 insertions, 43 deletions
diff --git a/doc/bird.sgml b/doc/bird.sgml index 557140b8..c8f80c46 100644 --- a/doc/bird.sgml +++ b/doc/bird.sgml @@ -505,6 +505,11 @@ include "tablename.conf";; See <ref id="channel-debug" name="debug"> in the channel section. Default: off. + <tag><label id="opt-debug-tables">debug tables all|off|{ states|routes|filters|events [, <m/.../] }</tag> + Set global defaults of table debugging options. + See <ref id="rtable-debug" name="debug"> in the table section. + Default: off. + <tag><label id="opt-debug-commands">debug commands <m/number/</tag> Control logging of client connections (0 for no logging, 1 for logging of connects and disconnects, 2 and higher for logging of all client @@ -527,6 +532,12 @@ include "tablename.conf";; killed by abort signal. The timeout has effective granularity of seconds, zero means disabled. Default: disabled (0). + <tag><label id="opt-threads">threads <m/number/</tag> + Set how many worker threads should BIRD spawn. Tests show that every + thread can utilize one complete CPU core, therefore you probably want to + keep at least one free core. The maximum feasible thread count heavily + depends on the actual workload and must be determined by testing or estimation. Default: 1 + <tag><label id="opt-mrtdump">mrtdump "<m/filename/"</tag> Set MRTdump file name. This option must be specified to allow MRTdump feature. Default: no dump file. @@ -670,21 +681,6 @@ to set options. disadvantage is that trie-enabled routing tables require more memory, which may be an issue especially in multi-table setups. Default: off. - <tag><label id="rtable-min-settle-time">min settle time <m/time/</tag> - Specify a minimum value of the settle time. When a ROA table changes, - automatic <ref id="proto-rpki-reload" name="RPKI reload"> may be - triggered, after a short settle time. Minimum settle time is a delay - from the last ROA table change to wait for more updates. Default: 1 s. - - - <tag><label id="rtable-max-settle-time">max settle time <m/time/</tag> - Specify a maximum value of the settle time. When a ROA table changes, - automatic <ref id="proto-rpki-reload" name="RPKI reload"> may be - triggered, after a short settle time. Maximum settle time is an upper - limit to the settle time from the initial ROA table change even if - there are consecutive updates gradually renewing the settle time. - Default: 20 s. - <tag><label id="rtable-gc-threshold">gc threshold <m/number/</tag> Specify a minimum amount of removed networks that triggers a garbage collection (GC) cycle. Default: 1000. @@ -699,6 +695,40 @@ to set options. periods. Default: adaptive, based on number of routing tables in the configuration. From 10 s (with <= 25 routing tables) up to 600 s (with >= 1500 routing tables). + + <tag><label id="rtable-cork-threshold">cork threshold <m/number/ <m/number/</tag> + Too many pending exports may lead to memory bloating. In such cases, + BIRD tries to relieve the memory pressure by pausing some routines until + the queue sizes get low enough. This option allows the user to set the + thresholds; first value is the low threshold (when to resume), the + second one is the high threshold (when to pause). The higher is the + threshold, the more memory can get used. In most cases, the defaults + should work for you. Default: 1024 8192. + + <tag><label id="rtable-export-settle-time">export settle time <m/time/ <m/time/</tag> + Minimum and maximum settle times, respectively, for export announcements. + When multiple routes are changing, this mechanism waits for the changes + to settle before waking up sleeping export threads but if the changes are coming + steadily, BIRD isn't waiting forever; at most the maximum time. + Default values: <cf/1 ms 100 ms/. You have to always provide both values. + + <tag><label id="rtable-route-refresh-export-settle-time">route refresh export settle time <m/time/ <m/time/</tag> + Minimum and maximum settle times, respectively, for export announcements + (the same as above), valid when any channel is currently doing a route refresh. + This serves a purpose of even more aggresive change bundling, knowing that there + is some active process generating changes in a fast pace. If you don't want + this feature, set this to the same values as <ref id="rtable-export-settle-time" name="export settle time">. + Default values: <cf/100 ms 3 s/. + + <tag><label id="rtable-debug">debug all|off|{ states|routes|events [, <m/.../] }</tag> + Set table debugging options. Each table can write some trace messages + into log with category <cf/trace/. You can request <cf/all/ trace messages + or select some types: <cf/states/ for table state changes and auxiliary + processes, <cf/routes/ for auxiliary route notifications (next hop update, + flowspec revalidation) and <cf/events/ for more detailed auxiliary routine + debug. See also <ref id="channel-debug" name="channel debugging option">. + Default: off. + </descrip> @@ -929,10 +959,12 @@ inherited from templates can be updated by new definitions. <cf/none/ is for dropping all routes. Default: <cf/all/ (except for EBGP). - <tag><label id="proto-export">export <m/filter/</tag> + <tag><label id="proto-export">export [ in <m/prefix/ ] <m/filter/</tag> This is similar to the <cf>import</cf> keyword, except that it works in - the direction from the routing table to the protocol. Default: <cf/none/ - (except for EBGP). + the direction from the routing table to the protocol. If <cf/in/ keyword is used, + only routes inside the given prefix are exported. Other routes are completely + ignored (e.g. no logging and no statistics). + Default: <cf/none/ (except for EBGP). <tag><label id="proto-import-keep-filtered">import keep filtered <m/switch/</tag> Usually, if an import filter rejects a route, the route is forgotten. @@ -954,6 +986,16 @@ inherited from templates can be updated by new definitions. <ref id="bgp-export-table" name="export table"> (for respective direction). Default: on. + <tag><label id="rtable-min-settle-time">roa settle time <m/time/ <m/time/</tag> + Minimum and maximum settle times, respectively, for ROA table changes. + The automatic reload is triggered after the minimum time after the last + ROA table change has been received but not later than the maximum time after + first unprocessed ROA table change. Therefore with default values, the + automatic reload happens 1 second after the ROA table stops updating, yet if it + were to be later than 20 seconds after the ROA table starts updating, + the automatic reload is triggered anyway. Default values: <cf/1 s 20 s/. + You have to always provide both values. + <tag><label id="proto-import-limit">import limit [<m/number/ | off ] [action warn | block | restart | disable]</tag> Specify an import route limit (a maximum number of routes imported from the protocol) and optionally the action to be taken when the limit is @@ -1767,17 +1809,8 @@ Common route attributes are: primary key of the routing table. Read-only. (See the <ref id="routes" name="chapter about routes">.) - <tag><label id="rta-scope"><m/enum/ scope</tag> - The scope of the route. Possible values: <cf/SCOPE_HOST/ for routes - local to this host, <cf/SCOPE_LINK/ for those specific for a physical - link, <cf/SCOPE_SITE/ and <cf/SCOPE_ORGANIZATION/ for private routes and - <cf/SCOPE_UNIVERSE/ for globally visible routes. This attribute is not - interpreted by BIRD and can be used to mark routes in filters. The - default value for new routes is <cf/SCOPE_UNIVERSE/. - <tag><label id="rta-preference"><m/int/ preference</tag> - Preference of the route. Valid values are 0-65535. (See the chapter - about routing tables.) + Preference of the route. <tag><label id="rta-from"><m/ip/ from</tag> The router which the route has originated from. @@ -1818,14 +1851,6 @@ Common route attributes are: creation/removal. Zero is returned for routes with undefined outgoing interfaces. Read-only. - <tag><label id="rta-onlink"><m/bool/ onlink</tag> - Onlink flag means that the specified nexthop is accessible on the - interface regardless of IP prefixes configured on the interface. - The attribute can be used to configure such next hops by first setting - <cf/onlink = true/ and <cf/ifname/, and then setting <cf/gw/. Possible - use case for setting this flag is to automatically build overlay IP-IP - networks on linux. - <tag><label id="rta-weight"><m/int/ weight</tag> Multipath weight of route next hops. Valid values are 1-256. Reading returns the weight of the first next hop, setting it sets weights of all @@ -3007,13 +3032,6 @@ be used in explicit configuration. be examined later by <cf/show route/, and can be used to reconfigure import filters without full route refresh. Default: off. - Note that currently the import table breaks routes with recursive - nexthops (e.g. ones from IBGP, see <ref id="bgp-gateway" name="gateway - recursive">), they are not properly updated after next hop change. For - the same reason, it also breaks re-evaluation of flowspec routes with - <ref id="bgp-validate" name="flowspec validation"> option enabled on - flowspec channels. - <tag><label id="bgp-export-table">export table <m/switch/</tag> A BGP export table contains all routes sent to given BGP neighbor, after application of export filters. It is also called <em/Adj-RIB-Out/ in BGP @@ -4349,6 +4367,14 @@ include standard channel config options; see the example below. <tag><label id="pipe-peer-table">peer table <m/table/</tag> Defines secondary routing table to connect to. The primary one is selected by the <cf/table/ keyword. + + <tag><label id="pipe-max-generation">max generation <m/expr/</tag> + Sets maximal generation of route that may pass through this pipe. + The generation value is increased by one by each pipe on its path. + Not meeting this requirement causes an error message complaining about + an overpiped route. If you have long chains of pipes, you probably want + to raise this value; anyway the default of 16 should be enough for even + most strange uses. Maximum is 254. </descrip> <sect1>Attributes diff --git a/doc/reply_codes b/doc/reply_codes index 02f4e656..bcbbbb03 100644 --- a/doc/reply_codes +++ b/doc/reply_codes @@ -61,6 +61,7 @@ Reply codes of BIRD command-line interface 1023 Show Babel interfaces 1024 Show Babel neighbors 1025 Show Babel entries +1026 Show threads 8000 Reply too long 8001 Route not found |