summaryrefslogtreecommitdiff
path: root/doc/bird.sgml
diff options
context:
space:
mode:
Diffstat (limited to 'doc/bird.sgml')
-rw-r--r--doc/bird.sgml14
1 files changed, 7 insertions, 7 deletions
diff --git a/doc/bird.sgml b/doc/bird.sgml
index 999fa294..23026eae 100644
--- a/doc/bird.sgml
+++ b/doc/bird.sgml
@@ -4141,8 +4141,8 @@ specific destination for them and you don't want to send them out through the
default route to prevent routing loops).
<p>There are five types of static routes: `classical' routes telling to forward
-packets to a neighboring router, multipath routes specifying several (possibly
-weighted) neighboring routers, device routes specifying forwarding to hosts on a
+packets to a neighboring router (single path or multipath, possibly weighted),
+device routes specifying forwarding to hosts on a
directly connected network, recursive routes computing their nexthops by doing
route table lookups for a given IP, and special routes (sink, blackhole etc.)
which specify a special action to be done instead of forwarding the packet.
@@ -4174,14 +4174,14 @@ definition of the protocol contains mainly a list of static routes.
<p>Route definitions (each may also contain a block of per-route options):
<descrip>
- <tag><label id="static-route-via-ip">route <m/prefix/ via <m/ip/</tag>
- Static route through a neighboring router. For link-local next hops,
+ <tag><label id="static-route-via-ip">route <m/prefix/ via <m/ip/ [mpls <m/num/[/<m/num/[/<m/num/[...]]]]</tag>
+ Static single path route through a neighboring router. For link-local next hops,
interface can be specified as a part of the address (e.g.,
- <cf/via fe80::1234%eth0/).
+ <cf/via fe80::1234%eth0/). MPLS labels should be specified in outer-first order.
- <tag><label id="static-route-via-mpath">route <m/prefix/ multipath via <m/ip/ [weight <m/num/] [bfd <m/switch/] [via <m/.../]</tag>
+ <tag><label id="static-route-via-mpath">route <m/prefix/ via <m/ip/ [mpls <m/num/[/<m/num/[/<m/num/[...]]]] [weight <m/num/] [bfd <m/switch/] [via ...]</tag>
Static multipath route. Contains several nexthops (gateways), possibly
- with their weights.
+ with their weights and MPLS labels.
<tag><label id="static-route-via-iface">route <m/prefix/ via <m/"interface"/</tag>
Static device route through an interface to hosts on a directly