summaryrefslogtreecommitdiff
path: root/doc/bird.sgml
diff options
context:
space:
mode:
Diffstat (limited to 'doc/bird.sgml')
-rw-r--r--doc/bird.sgml17
1 files changed, 16 insertions, 1 deletions
diff --git a/doc/bird.sgml b/doc/bird.sgml
index aa058b37..d17de23f 100644
--- a/doc/bird.sgml
+++ b/doc/bird.sgml
@@ -2144,6 +2144,13 @@ protocol bfd [<name>] {
to configure separate BFD protocol instances for IPv4 and for IPv6
sessions.
+ <tag><label id="bfd-strict-bind">strict bind <m/switch/</tag>
+ Specify whether each BFD interface should use a separate listening
+ socket bound to its local address, or just use a shared listening socket
+ accepting all addresses. Binding to a specific address could be useful
+ in cases like running multiple BIRD instances on a machine, each
+ handling a different set of interfaces. Default: disabled.
+
<tag><label id="bfd-iface">interface <m/pattern/ [, <m/.../] { <m/options/ }</tag>
Interface definitions allow to specify options for sessions associated
with such interfaces and also may contain interface specific options.
@@ -4202,6 +4209,14 @@ include standard channel config options; see the example below.
<tag><label id="pipe-peer-table">peer table <m/table/</tag>
Defines secondary routing table to connect to. The primary one is
selected by the <cf/table/ keyword.
+
+ <tag><label id="pipe-max-generation">max generation <m/expr/</tag>
+ Sets maximal generation of route that may pass through this pipe.
+ The generation value is increased by one by each pipe on its path.
+ Not meeting this requirement causes an error message complaining about
+ an overpiped route. If you have long chains of pipes, you probably want
+ to raise this value; anyway the default of 16 should be enough for even
+ most strange uses. Maximum is 254.
</descrip>
<sect1>Attributes
@@ -5235,7 +5250,7 @@ Note that for negated matches, value must be either zero or equal to bitmask
<cf>port 1..1023,1194,3306</cf>).
<tag><label id="flow-dport">dport <m/numbers-match/</tag>
- Set a mating destination port numbers (e.g. <cf>dport 49151</cf>).
+ Set a matching destination port numbers (e.g. <cf>dport 49151</cf>).
<tag><label id="flow-sport">sport <m/numbers-match/</tag>
Set a matching source port numbers (e.g. <cf>sport = 0</cf>).