diff options
Diffstat (limited to 'doc/bird.sgml')
| -rw-r--r-- | doc/bird.sgml | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/doc/bird.sgml b/doc/bird.sgml index 24be3de0..a07201ce 100644 --- a/doc/bird.sgml +++ b/doc/bird.sgml @@ -344,7 +344,7 @@ protocol rip { <tag><label id="opt-log">log "<m/filename/"|syslog [name <m/name/]|stderr all|{ <m/list of classes/ }</tag> Set logging of messages having the given class (either <cf/all/ or - <cf/{ error, trace }/ etc.) into selected destination (a file specified + <cf/{ error|trace [, <m/.../] }/ etc.) into selected destination (a file specified as a filename string, syslog with optional name argument, or the stderr output). Classes are: <cf/info/, <cf/warning/, <cf/error/ and <cf/fatal/ for messages about local problems, @@ -356,7 +356,7 @@ protocol rip { You may specify more than one <cf/log/ line to establish logging to multiple destinations. Default: log everything to the system log. - <tag><label id="opt-debug-protocols">debug protocols all|off|{ states, routes, filters, interfaces, events, packets }</tag> + <tag><label id="opt-debug-protocols">debug protocols all|off|{ states|routes|filters|interfaces|events|packets [, <m/.../] }</tag> Set global defaults of protocol debugging options. See <cf/debug/ in the following section. Default: off. @@ -386,7 +386,7 @@ protocol rip { Set MRTdump file name. This option must be specified to allow MRTdump feature. Default: no dump file. - <tag><label id="opt-mrtdump-protocols">mrtdump protocols all|off|{ states, messages }</tag> + <tag><label id="opt-mrtdump-protocols">mrtdump protocols all|off|{ states|messages [, <m/.../] }</tag> Set global defaults of MRTdump options. See <cf/mrtdump/ in the following section. Default: off. @@ -397,7 +397,7 @@ protocol rip { <tag><label id="opt-function">function <m/name/ (<m/parameters/) <m/local variables/ { <m/commands/ }</tag> Define a function. You can learn more about functions in the following chapter. - <tag><label id="opt-protocol">protocol rip|ospf|bgp|... [<m/name/ [from <m/name2/]] { <m>protocol options</m> }</tag> + <tag><label id="opt-protocol">protocol rip|ospf|bgp|<m/.../ [<m/name/ [from <m/name2/]] { <m>protocol options</m> }</tag> Define a protocol instance called <cf><m/name/</cf> (or with a name like "rip5" generated automatically if you don't specify any <cf><m/name/</cf>). You can learn more about configuring protocols in @@ -406,7 +406,7 @@ protocol rip { <cf><m/name2/</cf> You can run more than one instance of most protocols (like RIP or BGP). By default, no instances are configured. - <tag><label id="opt-template">template rip|bgp|... [<m/name/ [from <m/name2/]] { <m>protocol options</m> }</tag> + <tag><label id="opt-template">template rip|bgp|<m/.../ [<m/name/ [from <m/name2/]] { <m>protocol options</m> }</tag> Define a protocol template instance called <m/name/ (or with a name like "bgp1" generated automatically if you don't specify any <m/name/). Protocol templates can be used to group common options when many @@ -427,7 +427,7 @@ protocol rip { version, the lowest IP address of a non-loopback interface. In IPv6 version, this option is mandatory. - <tag><label id="opt-router-id-from">router id from [-] [ "<m/mask/" ] [ <m/prefix/ ] [, ...]</tag> + <tag><label id="opt-router-id-from">router id from [-] [ "<m/mask/" ] [ <m/prefix/ ] [, <m/.../]</tag> Set BIRD's router ID based on an IP address of an interface specified by an interface pattern. The option is applicable for IPv4 version only. See <ref id="proto-iface" name="interface"> section for detailed @@ -480,7 +480,7 @@ protocol rip { Option <cf/sorted/ can be used to enable sorting of routes, see <ref id="dsc-table-sorted" name="sorted table"> description for details. - <tag><label id="opt-roa-table">roa table <m/name/ [ { roa table options ... } ]</tag> + <tag><label id="opt-roa-table">roa table <m/name/ [ { <m/roa table options .../ } ]</tag> Create a new ROA (Route Origin Authorization) table. ROA tables can be used to validate route origination of BGP routes. A ROA table contains ROA entries, each consist of a network prefix, a max prefix length and @@ -522,7 +522,7 @@ agreement"). command line interface without needing to touch the configuration. Disabled protocols are not activated. Default: protocol is enabled. - <tag><label id="proto-debug">debug all|off|{ states, routes, filters, interfaces, events, packets }</tag> + <tag><label id="proto-debug">debug all|off|{ states|routes|filters|interfaces|events|packets [, <m/.../] }</tag> Set protocol debugging options. If asked, each protocol is capable of writing trace messages about its work to the log (with category <cf/trace/). You can either request printing of <cf/all/ trace messages @@ -533,7 +533,7 @@ agreement"). protocol, <cf/events/ for events internal to the protocol and <cf/packets/ for packets sent and received by the protocol. Default: off. - <tag><label id="proto-mrtdump">mrtdump all|off|{ states, messages }</tag> + <tag><label id="proto-mrtdump">mrtdump all|off|{ states|messages [, <m/.../] }</tag> Set protocol MRTdump flags. MRTdump is a standard binary format for logging information from routing protocols and daemons. These flags control what kind of information is logged from the protocol to the @@ -603,7 +603,7 @@ agreement"). <p>There are several options that give sense only with certain protocols: <descrip> - <tag><label id="proto-iface">interface [-] [ "<m/mask/" ] [ <m/prefix/ ] [, ...] [ { <m/option/ ; [...] } ]</tag> + <tag><label id="proto-iface">interface [-] [ "<m/mask/" ] [ <m/prefix/ ] [, <m/.../] [ { <m/option/; [<m/.../] } ]</tag> Specifies a set of interfaces on which the protocol is activated with given interface-specific options. A set of interfaces specified by one interface option is described using an interface pattern. The interface @@ -895,7 +895,7 @@ This argument can be omitted if there exists only a single instance. <tag><label id="cli-down">down</tag> Shut BIRD down. - <tag><label id="cli-debug">debug <m/protocol/|<m/pattern/|all all|off|{ states | routes | filters | events | packets }</tag> + <tag><label id="cli-debug">debug <m/protocol/|<m/pattern/|all all|off|{ states|routes|filters|events|packets [, <m/.../] }</tag> Control protocol debugging. <tag><label id="cli-dump">dump resources|sockets|interfaces|neighbors|attributes|routes|protocols</tag> @@ -1638,7 +1638,7 @@ protocol bfd [<name>] { </code> <descrip> - <tag><label id="bfd-iface">interface <m/pattern [, ...]/ { <m/options/ }</tag> + <tag><label id="bfd-iface">interface <m/pattern/ [, <m/.../] { <m/options/ }</tag> Interface definitions allow to specify options for sessions associated with such interfaces and also may contain interface specific options. See <ref id="proto-iface" name="interface"> common option for a detailed @@ -2356,7 +2356,7 @@ on Linux systems BIRD cannot change non-BIRD route in the kernel routing table. <p>There are just few configuration options for the Direct protocol: <p><descrip> - <tag><label id="direct-iface">interface <m/pattern [, ...]/</tag> + <tag><label id="direct-iface">interface <m/pattern/ [, <m/.../]</tag> By default, the Direct protocol will generate device routes for all the interfaces available. If you want to restrict it to some subset of interfaces or addresses (e.g. if you're using multiple routing tables @@ -3253,7 +3253,7 @@ in <rfc id="4861"> and also the DNS extensions from <rfc id="6106">. definitions, prefix definitions and DNS definitions: <descrip> - <tag><label id="radv-iface">interface <m/pattern [, ...]/ { <m/options/ }</tag> + <tag><label id="radv-iface">interface <m/pattern/ [, <m/.../] { <m/options/ }</tag> Interface definitions specify a set of interfaces on which the protocol is activated and contain interface specific options. See <ref id="proto-iface" name="interface"> common options for @@ -3563,7 +3563,7 @@ protocol rip [<name>] { nexthops in one route. By default, ECMP is disabled. If enabled, default value of the limit is 16. - <tag><label id="rip-iface">interface <m/pattern [, ...]/ { <m/options/ }</tag> + <tag><label id="rip-iface">interface <m/pattern/ [, <m/.../] { <m/options/ }</tag> Interface definitions specify a set of interfaces on which the protocol is activated and contain interface specific options. See <ref id="proto-iface" name="interface"> common options for @@ -3795,7 +3795,7 @@ definition of the protocol contains mainly a list of static routes. interface can be specified as a part of the address (e.g., <cf/via fe80::1234%eth0/). - <tag><label id="static-route-via-mpath">route <m/prefix/ multipath via <m/ip/ [weight <m/num/] [bfd <m/switch/] [via ...]</tag> + <tag><label id="static-route-via-mpath">route <m/prefix/ multipath via <m/ip/ [weight <m/num/] [bfd <m/switch/] [via <m/.../]</tag> Static multipath route. Contains several nexthops (gateways), possibly with their weights. |