diff options
Diffstat (limited to 'doc/bird.sgml')
| -rw-r--r-- | doc/bird.sgml | 15 |
1 files changed, 5 insertions, 10 deletions
diff --git a/doc/bird.sgml b/doc/bird.sgml index b3ac38b0..e531da40 100644 --- a/doc/bird.sgml +++ b/doc/bird.sgml @@ -3491,6 +3491,11 @@ protocol ospf [v2|v3] <name> { Specifies interval in seconds between retransmissions of unacknowledged updates. Default value is 5. + <tag><label id="ospf-transmit-delay">transmit delay <M>num</M></tag> + Specifies estimated transmission delay of link state updates send over + the interface. The value is added to LSA age of LSAs propagated through + it. Default value is 1. + <tag><label id="ospf-priority">priority <M>num</M></tag> On every multiple access network (e.g., the Ethernet) Designated Router and Backup Designated router are elected. These routers have some special @@ -3511,16 +3516,6 @@ protocol ospf [v2|v3] <name> { <m/dead/ seconds, it will consider the neighbor down. If both directives <cf/dead count/ and <cf/dead/ are used, <cf/dead/ has precedence. - <tag><label id="ospf-secondary">secondary <M>switch</M></tag> - On BSD systems, older versions of BIRD supported OSPFv2 only for the - primary IP address of an interface, other IP ranges on the interface - were handled as stub networks. Since v1.4.1, regular operation on - secondary IP addresses is supported, but disabled by default for - compatibility. This option allows to enable it. The option is a - transitional measure, will be removed in the next major release as the - behavior will be changed. On Linux systems, the option is irrelevant, as - operation on non-primary addresses is already the regular behavior. - <tag><label id="ospf-rx-buffer">rx buffer <M>num</M></tag> This option allows to specify the size of buffers used for packet processing. The buffer size should be bigger than maximal size of any |