diff options
Diffstat (limited to 'doc/bird.sgml')
| -rw-r--r-- | doc/bird.sgml | 32 |
1 files changed, 25 insertions, 7 deletions
diff --git a/doc/bird.sgml b/doc/bird.sgml index 01b59c6a..964895e3 100644 --- a/doc/bird.sgml +++ b/doc/bird.sgml @@ -1596,13 +1596,12 @@ networks. Babel is conceptually very simple in its operation and "just works" in its default configuration, though some configuration is possible and in some cases desirable. -<p>While the Babel protocol is dual stack (i.e., can carry both IPv4 and IPv6 -routes over the same IPv6 transport), BIRD presently implements only the IPv6 -subset of the protocol. No Babel extensions are implemented, but the BIRD -implementation can coexist with implementations using the extensions (and will -just ignore extension messages). +<p>The Babel protocol is dual stack; i.e., it can carry both IPv4 and IPv6 +routes over the same IPv6 transport. For sending and receiving Babel packets, +only a link-local IPv6 address is needed. -<p>The Babel protocol implementation in BIRD is currently in alpha stage. +<p>BIRD does not implement any Babel extensions, but will coexist with +implementations using extensions (and will just ignore extension messages). <sect1>Configuration <label id="babel-config"> @@ -1623,6 +1622,8 @@ protocol babel [<name>] { rx buffer <number>; tx length <number>; check link <switch>; + next hop ipv4 <address>; + next hop ipv6 <address>; }; } </code> @@ -1680,6 +1681,18 @@ protocol babel [<name>] { routes received from them are withdrawn. It is possible that some hardware drivers or platforms do not implement this feature. Default: yes. + + <tag><label id="babel-next-hop-ipv4">next hop ipv4 <m/address/</tag> + Set the next hop address advertised for IPv4 routes advertised on this + interface. If not set, the first IPv4 address found on the interface will + be used, so it should only be necessary to set this option if this + auto-detection fails or finds the wrong address. + + <tag><label id="babel-next-hop-ipv6">next hop ipv6 <m/address/</tag> + Set the next hop address advertised for IPv6 routes advertised on this + interface. If not set, the same link-local address that is used as the + source for Babel packets will be used. In normal operation, it should not + be necessary to set this option. </descrip> <sect1>Attributes @@ -1708,7 +1721,12 @@ protocol babel { # configured on local interfaces, plus re-distribute all routes received # from other babel peers. - export where (source = RTS_DEVICE) || (source = RTS_BABEL); + ipv4 { + export where (source = RTS_DEVICE) || (source = RTS_BABEL); + }; + ipv6 { + export where (source = RTS_DEVICE) || (source = RTS_BABEL); + }; } </code> |